centos 7:network: 正在打开接口 ens33: 错误:激活连接失败:No suitable device found for this connection.

Mar  :: localhost systemd: Starting LSB: Bring up/down networking...
Mar :: localhost network: 正在打开环回接口: [ 确定 ]
Mar :: localhost NetworkManager[]: <info> [1552270699.1055] audit: op="connection-activate" uuid="fd005f04-41ac-4401-bd27-decd3492dd84" name="ens33" result="fail" reason="No suitable device found for this connection."
Mar :: localhost network: 正在打开接口 ens33: 错误:激活连接失败:No suitable device found for this connection.
Mar :: localhost network: [失败]
Mar :: localhost network: RTNETLINK answers: File exists
Mar :: localhost network: RTNETLINK answers: File exists
Mar :: localhost network: RTNETLINK answers: File exists
Mar :: localhost network: RTNETLINK answers: File exists
Mar :: localhost network: RTNETLINK answers: File exists
Mar :: localhost network: RTNETLINK answers: File exists
Mar :: localhost network: RTNETLINK answers: File exists
Mar :: localhost network: RTNETLINK answers: File exists
Mar :: localhost network: RTNETLINK answers: File exists
Mar :: localhost systemd: network.service: control process exited, code=exited status=
Mar :: localhost systemd: Failed to start LSB: Bring up/down networking.
Mar :: localhost systemd: Unit network.service entered failed state.
Mar :: localhost systemd: network.service failed.

解决办法:

  1. 如果新加网卡或者克隆虚拟机,可能是 mac 地址不对,使用 ip addr 查看mac地址
    • 永久修改:

然后把  /etc/sysconfig/network-scripts/ifcfg-ens33(MACADDR) 或者 /sys/class/net/ens33/address

    • 临时修改:
#ifconfig eth0 down /*禁掉eth0网卡,这里以eth0网卡为例*/

#ifconfig eth0 hw ether :AA:BB:CC:DD:EE /*修改eth0网卡的MAC地址*/

#ifconfig eth0 up   /*重新启动eth0网卡*/

2. Mac 没问题,关闭系统的 NetworkManager , 注意大小写

上一篇:ElasticSearch 学习记录之如任何设计可扩容的索引结构


下一篇:基于FPGA的VGA可移植模块终极设计【转】