1 /****************************************************************************
2 Copyright (c) 2010 Siemens Product Lifecycle Management Software, Inc.
3 Unpublished - All rights reserved
4
5
6
7
8 File Description:
9
10 Define names of all NX object types and subtypes.
11
12
13
14 *****************************************************************************/
15
16 #ifndef UF_OBJECT_TYPES_H_INCLUDED
17 #define UF_OBJECT_TYPES_H_INCLUDED
18
19
20 /***************************************************************************
21
22 ***************************************************************************/
23
24 #ifdef __cplusplus
25 extern "C" {
26 #endif
27
28 #define UF_dummy_type 1 /* For internal use only */
29
30 #define UF_point_type 2
31 #define UF_point_subtype 0
32 #define UF_old_point_1_subtype 1 /* Obsolete in v10 */
33 #define UF_old_point_2_subtype 2 /* Obsolete in v10 */
34
35 #define UF_line_type 3
36 #define UF_line_normal_subtype 0
37 #define UF_line_old_subtype 1 /* Obsolete in v10 */
38 #define UF_sketch_ref_line_subtype 101 /* Obsolete in V17.0. */
39 #define UF_infinite_line_subtype 2
40
41 #define UF_solid_collection_type 4 /* Obsolete in V10 - Reused in NX 9.0 for UF_image_type */
42
43 #define UF_image_type 4 /* new in NX9.0 */
44 #define UF_image_raster_image_subtype 0 /* new in NX9.0 */
45
46 #define UF_circle_type /* Also called "arc" */ 5
47 #define UF_circle_open_subtype 0 /* Not Used - To determine whether a circle is open or closed please use UF_MODL_ask_curve_periodicity */
48 #define UF_circle_closed_subtype 1 /* Not Used - To determine whether a circle is open or closed please use UF_MODL_ask_curve_periodicity */
49 #define UF_sketch_ref_circle_subtype 101 /* Obsolete in V17.0. */
50
51 #define UF_conic_type 6
52 #define UF_conic_ellipse_subtype 2
53 #define UF_conic_parabola_subtype 3
54 #define UF_conic_hyperbola_subtype 4
55
56 #define UF_spcurve_type 7 /* Obsolete in V10 */
57 #define UF_spcurve_open_subtype 1 /* Obsolete in V10 */
58 #define UF_spcurve_closed_subtype 2 /* Obsolete in V10 */
59 #define UF_spcurve_periodic_subtype 3 /* Obsolete in V10 */
60
61 #define UF_old_spline_type 8 /* Obsolete in V10 - Reused in NX 9.0 for UF_product_interface_type */
62 #define UF_spline_open_subtype 1 /* Obsolete in V10 - Reused in NX 9.0 for UF_product_interface_geometry_subtype */
63 #define UF_spline_closed_subtype 2 /* Obsolete in V10 - Reused in NX 9.0 for UF_product_interface_collection_subtype */
64
65 #define UF_product_interface_type 8 /* new in NX9.0 for product interface object */
66 #define UF_product_interface_geometry_subtype 1 /* new in NX9.0 for product interface object */
67 #define UF_product_interface_collection_subtype 2 /* new in NX9.0 for product interface object */
68 #define UF_product_interface_expression_subtype 3 /* new in NX9.0 for product interface object */
69
70 #define UF_spline_type 9 /* Renamed in V10 */
71 #define UF_spline_subtype 0
72 #define UF_b_curve_bezier_subtype 0 /* There is no difference
73 between subtype 0 and
74 subtype 1 */
75 #define UF_b_curve_b_spline_subtype 1 /* There is no difference
76 between subtype 0 and
77 subtype 1 */
78 #define UF_sketch_ref_spline_subtype 101 /* Obsolete in V17.0 */
79
80 #define UF_pattern_type 10
81 #define UF_pattern_subtype 0
82 #define UF_pattern_point_subtype 1
83
84 #define UF_part_attribute_type 11
85 #define UF_part_attribute_subtype 0
86 #define UF_part_attribute_cache_subtype 1
87 #define UF_temporary_part_attribute_subtype 2
88
89 #define UF_layer_category_type 12
90
91 #define UF_kanji_type 13
92
93 #define UF_boundary_type 14
94
95 #define UF_group_type 15
96
97 #define UF_cylinder_type 16 /* Obsolete in V10 */
98 #define UF_surface_normal_parallel_subtype 0
99 #define UF_surface_normal_flipped_subtype 10
100
101 #define UF_cone_type 17 /* Obsolete in V10 */
102 #define UF_surface_normal_parallel_subtype 0
103 #define UF_surface_normal_flipped_subtype 10
104
105 #define UF_sphere_type 18 /* Obsolete in V10 */
106 #define UF_surface_normal_parallel_subtype 0
107 #define UF_surface_normal_flipped_subtype 10
108
109 #define UF_surface_of_revolution_type 19 /* Obsolete in V10 */
110 #define UF_surface_normal_parallel_u_subtype 0
111 #define UF_surface_normal_parallel_v_subtype 1
112 #define UF_surface_normal_flipped_u_subtype 10
113 #define UF_surface_normal_flipped_v_subtype 11
114
115 #define UF_tabulated_cylinder_type 20 /* Obsolete in V10 */
116 #define UF_surface_normal_parallel_subtype 0
117 #define UF_surface_normal_flipped_subtype 10
118
119 #define UF_ruled_surface_type 21 /* Obsolete in V10 */
120 #define UF_surface_normal_parallel_subtype 0
121 #define UF_surface_normal_flipped_subtype 10
122
123 #define UF_bounded_plane_type 22 /* Obsolete in V10 */
124 #define UF_surface_normal_parallel_subtype 0
125 #define UF_surface_normal_flipped_subtype 10
126
127 #define UF_blended_face_type 23 /* Obsolete in V10 */
128 #define UF_surface_normal_parallel_subtype 0
129 #define UF_surface_normal_flipped_subtype 10
130
131 #define UF_sculptured_surface_type 24 /* Obsolete in V10 */
132 #define UF_surface_normal_parallel_subtype 0
133 #define UF_surface_normal_flipped_subtype 10
134
135 #define UF_drafting_entity_type 25
136 #define UF_draft_note_subtype 1
137 #define UF_draft_label_subtype 2
138 #define UF_draft_id_symbol_subtype 3
139 #define UF_draft_fpt_subtype 4
140 #define UF_draft_cntrline_subtype 5
141 #define UF_draft_crosshatch_subtype 6
142 #define UF_draft_assorted_parts_subtype 7
143 #define UF_draft_intersection_subtype 8
144 #define UF_draft_target_point_subtype 9
145 #define UF_draft_user_defined_subtype 10
146 #define UF_draft_area_fill_subtype 11
147 #define UF_draft_solid_fill_subtype 12
148 #define UF_draft_linear_cntrln_subtype 13
149 #define UF_draft_full_cir_cntrln_subtype 14
150 #define UF_draft_part_cir_cntrln_subtype 15
151 #define UF_draft_full_blt_circle_subtype 16
152 #define UF_draft_part_blt_circle_subtype 17
153 #define UF_draft_offset_cntrpt_subtype 18
154 #define UF_draft_cyl_cntrln_subtype 19
155 #define UF_draft_sym_cntrln_subtype 20
156 #define UF_draft_block_cntrln_subtype 21
157 #define UF_draft_label_on_parent_subtype 22
158 #define UF_draft_point_subtype 37
159 #define UF_draft_facet_subtype 41
160 #define UF_draft_title_block_subtype 42
161 #define UF_draft_frame_bar_subtype 43
162 #define UF_draft_arrow_subtype 44
163 #define UF_draft_cutting_plane_symbol_subtype 45
164
165 #define UF_dimension_type 26
166 #define UF_dim_horizontal_subtype 1
167 #define UF_dim_vertical_subtype 2
168 #define UF_dim_parallel_subtype 3
169 #define UF_dim_cylindrical_subtype 4
170 #define UF_dim_perpendicular_subtype 5
171 #define UF_dim_angular_minor_subtype 6
172 #define UF_dim_angular_major_subtype 7
173 #define UF_dim_arc_length_subtype 8
174 #define UF_dim_radius_subtype 9
175 #define UF_dim_diameter_subtype 10
176 #define UF_dim_hole_subtype 11
177 #define UF_dim_conc_circle_subtype 12
178 #define UF_dim_ordinate_horiz_subtype 13
179 #define UF_dim_ordinate_vert_subtype 14
180 #define UF_dim_assorted_parts_subtype 15
181 #define UF_dim_folded_radius_subtype 16
182 #define UF_dim_chain_dimensions_subtype 17
183 #define UF_dim_ordinate_origin_subtype 18 /*CATa*/
184 #define UF_dim_perimeter_subtype 19
185 #define UF_dim_chamfer_subtype 20
186
187 #define UF_font_table_type 27
188
189 #define UF_color_table_type 28
190
191 #define UF_margin_type 29
192
193 #define UF_gfem_load_type 31 /* Obsolete in V16 */
194 #define UF_gfem_load_force_subtype 1
195 #define UF_gfem_load_moment_subtype 2
196 #define UF_gfem_load_displacement_subtype 3
197 #define UF_gfem_load_rotation_subtype 4
198 #define UF_gfem_load_nodal_temp_subtype 5
199 #define UF_gfem_load_edge_pressure_subtype 6
200 #define UF_gfem_load_face_pressure_subtype 7
201
202 #define UF_caegeom_type 31
203 #define UF_caegeom_region_subtype 8
204 #define UF_caegeom_face_subtype 9
205 #define UF_caegeom_edge_subtype 10
206 #define UF_caegeom_vertex_subtype 11
207 #define UF_caegeom_body_subtype 12
208 #define UF_caegeom_volume_subtype 13
209
210 #define UF_gfem_node_type 32 /* Obsolete in V16 */
211 #define UF_gfem_node_subtype 0
212
213 #define UF_sfem_nxbc_type 32 /* introduced in NX4 */
214 #define UF_sfem_nxload_subtype 1
215 #define UF_sfem_nxconstraint_subtype 2
216 #define UF_sfem_nxssso_subtype 3
217
218 #define UF_gfem_element_type 33 /* Obsolete in V16 */
219 #define UF_gfem_element_form_1_subtype 1
220 #define UF_gfem_element_form_2_subtype 2
221 #define UF_gfem_element_form_3_subtype 3
222 #define UF_gfem_element_form_4_subtype 4
223 #define UF_gfem_element_form_5_subtype 5
224 #define UF_gfem_element_form_6_subtype 6
225 #define UF_gfem_element_form_7_subtype 7
226 #define UF_gfem_element_form_8_subtype 8
227 #define UF_gfem_element_form_9_subtype 9
228 #define UF_gfem_element_form_10_subtype 10
229
230 #define UF_sfem_connection_recipe_type 33 /* introduced in NX6 */
231 #define UF_sfem_connection_recipe_point_point_subtype 1
232 #define UF_sfem_connection_recipe_point_edge_subtype 2
233 #define UF_sfem_connection_recipe_point_face_subtype 3
234 #define UF_sfem_connection_recipe_edge_edge_subtype 4
235 #define UF_sfem_connection_recipe_edge_face_subtype 5
236 #define UF_sfem_weld_connection_recipe_subtype 6
237 #define UF_sfem_bolt_recipe_nut_subtype 7
238 #define UF_sfem_bolt_recipe_tap_subtype 8
239 #define UF_sfem_bolt_recipe_spider_subtype 9
240
241 #define UF_gfem_ferd_type 34 /* Obsolete in V16 */
242 #define UF_gfem_ferd_subtype 0
243
244 #define UF_meshpoint_type 34
245
246 #define UF_gfem_annotation_type 35 /* Obsolete in V16 -- Reused */
247 #define UF_gfem_annotation_subtype 0
248
249 #define UF_caemisc_type 35
250 #define UF_caemisc_edge_density_subtype 1
251 #define UF_caemisc_face_density_subtype 2
252 #define UF_caemisc_mmc_subtype 3
253 #define UF_caemisc_weld_row_subtype 4
254 #define UF_caemisc_mapped_hole_subtype 5
255 #define UF_caemisc_fillet_density_subtype 6
256 #define UF_caemisc_cylinder_density_subtype 7
257
258 #define UF_gfem_control_node_list_type 36 /* Obsolete in V16 */
259 #define UF_gfem_control_node_list_subtype 0
260
261 #define UF_gfem_material_type 37
262 #define UF_gfem_material_subtype 0
263
264 #define UF_instance_type 38 /* Obsolete in V4 - Reused in NX 8.0 for UF_pdm_design_feature_type */
265
266 #define UF_pdm_design_feature_type 38
267 #define UF_pdm_design_feature_subtype 0
268
269 #define UF_connection_type 39 /* Obsolete in V4 */
270 #define UF_connection_normal_subtype 0
271 #define UF_connection_offpage_subtype 1
272 #define UF_connection_special_subtype 2
273
274 #define UF_prefix_type 40 /* Obsolete in V4, re-use it by UF_view_set_type */
275 #define UF_view_set_type 40
276 #define UF_view_set_subtype 0
277
278 #define UF_tool_type 41 /* Obsolete, reused by RM_component2d_type */
279 #define UF_component2d_type 41
280
281 #define UF_sub_entity_for_dim_type 42
282 #define UF_dim_sub_line_subtype 1
283 #define UF_dim_sub_arc_subtype 2
284 #define UF_dim_sub_text_subtype 3
285
286 #define UF_b_surface_type 43
287 #define UF_b_surface_bezier_subtype 0 /* Obsolete in V10 */
288 #define UF_b_surface_b_spline_subtype 1 /* Obsolete in V10 */
289
290 #define UF_validation_type 44
291
292 #define UF_coordinate_system_type 45
293 #define UF_csys_normal_subtype 0
294 #define UF_csys_wcs_subtype 1
295 #define UF_csys_cylindrical_subtype 2
296 #define UF_csys_spherical_subtype 3
297
298 #define UF_plane_type 46
299
300 #define UF_bounded_plane_loop_type 47 /* Obsolete in V7 */
301 #define UF_bounded_plane_loop_subtype 0
302
303 #define UF_report_entity_type 48 /* Obsolete in NX2 */
304 #define UF_report_parts_list_subtype 1
305
306 #define UF_report_entry_entity_type 49 /* Obsolete in NX2 */
307 #define UF_report_parts_list_entry_subtype 1
308
309 #define UF_pattern_definition_type 49 /* new in NX9 */
310 #define UF_pattern_definition_subtype 0
311 #define UF_displayed_pattern_definition_subtype 1
312 #define UF_linear_pattern_definition_subtype 2
313 #define UF_circular_pattern_definition_subtype 3
314 #define UF_reference_pattern_definition_subtype 4
315 #define UF_pure_reference_pattern_definition_subtype 5
316
317 #define UF_nesting_type 50
318
319 #define UF_tool_display_type 51
320 #define UF_tool_display_subtype 0
321 #define UF_mcs_display_subtype 1
322
323 #define UF_skeleton_ent_type 52
324 #define UF_skeleton_grid_subtype 1 /* obs. in NX2 */
325 #define UF_skeleton_wind_bords_subtype 2
326 #define UF_skeleton_wcs_display_subtype 3
327 #define UF_skeleton_modeling_grid_subtype 4 /* new in NX2 */
328 #define UF_skeleton_drawing_grid_subtype 5 /* new in NX2 */
329 #define UF_skeleton_sketcher_grid_subtype 6 /* new in NX2 */
330 #define UF_skeleton_shed_grid_subtype 7 /* new in NX6 */
331 #define UF_skeleton_plane_grid_subtype 8 /* new in NX6 */
332 #define UF_skeleton_datum_plane_grid_subtype 9 /* new in NX6 */
333 #define UF_skeleton_entity_selection_plane_subtype 10 /* new in NX8 */
334 #define UF_skeleton_drawing_sheetzones_grid_subtype 11 /* new in NX8 */
335
336 #define UF_parameter_type 53 /* Global Data */
337 #define UF_parm_mach_global_subtype 1 /* Obsolete in V5 */
338 #define UF_parm_lathe_global_subtype 2 /* Obsolete in V5 */
339 #define UF_parm_lathe_rough_subtype 3 /* Obsolete in V5 */
340 #define UF_parm_lathe_finish_subtype 4 /* Obsolete in V5 */
341 #define UF_parm_lathe_groove_subtype 5 /* Obsolete in V5 */
342 #define UF_parm_lathe_thread_subtype 6 /* Obsolete in V5 */
343 #define UF_parm_drill_subtype 7 /* Obsolete in V5 */
344 #define UF_parm_mill_global_subtype 8 /* Obsolete in V5 */
345 #define UF_parm_profile_subtype 9 /* Obsolete in V5 */
346 #define UF_parm_follow_pocket_subtype 10 /* Obsolete in V5 */
347 #define UF_parm_zig_zag_subtype 11 /* Obsolete in V5 */
348 #define UF_parm_surf_contour_subtype 12 /* Obsolete in V5 */
349 #define UF_parm_line_machining_subtype 13 /* Obsolete in V5 */
350 #define UF_parm_solid_subtype 13
351 #define UF_parm_rough_to_depth_subtype 14 /* Obsolete in V5 */
352 #define UF_parm_solid_color_subtype 14
353 #define UF_parm_point_to_point_subtype 15 /* Obsolete in V5 */
354 #define UF_parm_dimensions_data_subtype 16
355 #define UF_parm_kanji_data_subtype 17
356 #define UF_parm_schematics_data_subtype 18 /* Obsolete in V10 */
357 #define UF_parm_menu_table_data_subtype 19
358 #define UF_parm_ug_data_subtype 20
359 #define UF_parm_display_data_subtype 21
360 #define UF_parm_layer_data_subtype 22
361 #define UF_parm_gfem_femcom 23 /* Obsolete in V16 */
362 #define UF_parm_gfem_poscom 24 /* Obsolete in V16 */
363 #define UF_parm_model_bounds_subtype 25
364 #define UF_parm_diagram_subtype 26 /* Obsolete in NX3 */
365 #define UF_parm_sheet_metal_subtype 30
366 #define UF_parm_ladder_diagram_subtype 31
367 #define UF_parm_calculator_subtype 32
368 #define UF_parm_member_view_subtype 33
369 #define UF_parm_sketch_tol_data_subtype 34
370 #define UF_parm_hidden_line_subtype 35
371 #define UF_parm_font_table_subtype 36
372 #define UF_parm_rapid_proto_subtype 37
373 #define UF_parm_drawing_control 38
374 #define UF_parm_section_line_subtype 39
375 #define UF_parm_retain_ann_subtype 40
376 #define UF_parm_sfem_subtype 41 /* OBSOLETE in NX4 */
377 #define UF_parm_annotation_subtype 42
378 #define UF_parm_crvtr_disp_subtype 43
379 #define UF_parm_drawings_subtype 44
380 #define UF_parm_modeling_subtype 45
381 #define UF_parm_tabular_note_subtype 46
382 #define UF_parm_parts_list_subtype 47
383 #define UF_parm_units_subtype 48
384 #define UF_parm_navigation_data_subtype 49
385 #define UF_parm_jack_env_subtype 50
386 #define UF_parm_caemodl_vertex_subtype 51
387 #define UF_parm_caemodl_edge_subtype 52
388 #define UF_parm_caemodl_face_subtype 53
389 #define UF_parm_caemodl_region_subtype 54
390 #define UF_parm_caemodl_body_subtype 55
391 #define UF_parm_sheet_metal_design_subtype 56
392 #define UF_parm_cae_post_main_subtype 57
393 #define UF_parm_caeabs_main_subtype 58
394 #define UF_parm_wizard_subtype 59 /* Root object of all Process Studio Wizard persistent data*/
395 #define UF_parm_main_fem_subtype 60 /* Root object of FEM */
396 #define UF_parm_main_sim_subtype 61 /* Root object of SIM */
397 #define UF_parm_ship_building_subtype 62
398 #define UF_parm_pmi_data_subtype 63
399 #define UF_parm_global_set_subtype 64
400 #define UF_parm_field_main_subtype 65 /* root object of Fields */
401 #define UF_parm_kmc_main_subtype 66 /* root object of MOTION */
402 #define UF_parm_cae_so_manager_subtype 67
403 #define UF_parm_aero_sheet_metal_subtype 68
404 #define UF_parm_flex_pcb_design_subtype 69
405 #define UF_parm_caemodl_volume_subtype 70
406 #define UF_parm_section_list_subtype 71
407 #define UF_parm_autopopulate_subtype 72
408 #define UF_parm_cae_ideal_main_subtype 73 /* Idealized part */
409 #define UF_parm_main_assy_fem_subtype 74 /* Root object of Assembly FEM */
410 #define UF_parm_attr_subtype 99 /* Attribute descriptions and part attributes */
411 #define UF_parm_student_edition_subtype 75
412 #define UF_parm_pirate_data_subtype 76
413 #define UF_parm_imported_jt_data_subtype 77
414 #define UF_parm_drafting_automation_subtype 78
415 #define UF_parm_main_agent_subtype 79 /* Root object of all CaeSim UpdateAgents */
416 #define UF_parm_ship_bodyref 80
417 #define UF_parm_ship_rootobject 81
418 #define UF_parm_ftk_function_main_subtype 82 /* FTK function main object */
419 #define UF_parm_layout2d_subtype 83
420
421 #define UF_device_type 54 /* Obsolete in V15 - Reused In NX6 */
422 #define UF_dynamic_section_cut_type 54
423 #define UF_dynamic_section_cut_subtype_any -1
424 #define UF_dynamic_section_body_cut_subtype 1
425 #define UF_dynamic_section_component_cut_subtype 2
426
427 #define UF_matrix_type 55
428
429 #define UF_gear_type 56 /* Obsolete in V10 */
430 #define UF_sfem_dofset_type 56 /* Reused UF_gear_type in NX750 */
431
432 #define UF_gear_mesh_type 57 /* Obsolete in V10 */
433
434 #define UF_gear_train_type 58 /* Obsolete in V10 */
435
436 #define UF_fatigue_type 59 /* Obsolete in V10 - Reused */
437 #define UF_camera_type 59
438
439 #define UF_view_type 60
440 #define UF_view_section_subtype 0
441 #define UF_view_instance_subtype 1
442 #define UF_view_imported_subtype 2
443 #define UF_view_base_member_subtype 3
444 #define UF_view_orthographic_subtype 4
445 #define UF_view_auxiliary_subtype 5
446 #define UF_view_detail_subtype 6
447 #define UF_view_modeling_subtype 7
448 #define UF_view_user_defined_subtype 8
449 #define UF_view_graph_subtype 9
450 #define UF_view_drawing_sheet_subtype 10
451 #define UF_view_cae_subtype 11
452 #define UF_view_break_subtype 12
453 #define UF_view_query_result_subtype 13
454 #define UF_view_drawing_subtype 14
455 #define UF_view_break_slave_subtype 15
456 #define UF_view_search_model_view_subtype 16
457 #define UF_view_lightweight_section_subtype 17
458 #define UF_view_imported_pmi_lightweight_section_subtype 18
459
460 #define UF_layout_type 61
461 #define UF_normal_layout_subtype 0
462 #define UF_canned_layout_subtype 1
463
464 #define UF_drawing_type 62
465
466 #define UF_component_type 63
467 #define UF_component_subtype 0
468 #define UF_part_occurrence_subtype 1
469 #define UF_shadow_part_occ_subtype 2
470 #define UF_design_element_search_result_subtype 3
471
472 #define UF_reference_set_type 64
473 #define UF_reference_design_subtype 0
474 #define UF_reference_tool_subtype 1
475 #define UF_reference_parameter_subtype 2
476 #define UF_reference_cam_template_subtype 3
477 #define UF_reference_cam_task_subtype 4
478 #define UF_reference_design_model_subtype 5
479 #define UF_reference_design_lightweight_subtype 6
480 #define UF_reference_flat_pattern_subtype 7
481
482 #define UF_offset_surface_type 65
483 #define UF_surface_normal_parallel_subtype 0
484 #define UF_surface_normal_flipped_subtype 10
485
486 #define UF_foreign_surface_type 66 /* Customer defined */
487 #define UF_surface_normal_parallel_subtype 0
488 #define UF_surface_normal_flipped_subtype 10
489
490 #define UF_foreign_surface_data_type 67 /* Customer defined */
491
492 #define UF_occ_instance_type 68
493 #define UF_occ_instance_subtype 0
494
495 #define UF_occ_shadow_part_type 69
496 #define UF_explosion_subtype 0
497
498 #define UF_solid_type 70
499 #define UF_solid_body_subtype 0
500 #define UF_solid_swept_body_subtype 1 /* Internal use only - not displayable */
501 #define UF_solid_face_subtype 2
502 #define UF_solid_edge_subtype 3
503 #define UF_solid_silhouette_subtype 4 /* Moved to type 201 in V10 */
504 #define UF_solid_foreign_surf_subtype 5
505
506 #define UF_face_type 71 /* Obsolete in V10 */
507 #define UF_cylinder_subtype 16 /* Obsolete in V10 */
508 #define UF_cone_subtype 17 /* Obsolete in V10 */
509 #define UF_sphere_subtype 18 /* Obsolete in V10 */
510 #define UF_surface_of_revolution_subtype 19 /* Obsolete in V10 */
511 #define UF_tabulated_cylinder_subtype 20 /* Obsolete in V10 */
512 #define UF_ruled_surface_subtype 21 /* Obsolete in V10 */
513 #define UF_bounded_plane_subtype 22 /* Obsolete in V10 */
514 #define UF_fillet_surface_subtype 23 /* Obsolete in V10 */
515 #define UF_sculptured_surface_subtype 24 /* Obsolete in V10 */
516 #define UF_b_surface_subtype 43 /* Obsolete in V10 */
517 #define UF_offset_surface_subtype 65 /* Obsolete in V10 */
518 #define UF_foreign_surface_subtype 66 /* Obsolete in V10 */
519
520 #define UF_edge_type 72 /* Obsolete in V10 */
521 #define UF_edge_0_subtype 0
522 #define UF_edge_3_subtype 3
523
524 #define UF_solid_composite_type 73 /* Obsolete in V10 */
525
526 #define UF_history_type 74
527
528 #define UF_gfem_post_data_type 75 /* Obsolete in V16 */
529 #define UF_gfem_post_data_subtype 0
530
531 #define UF_gfem_post_ferd_type 76 /* Obsolete in V16 */
532 #define UF_gfem_control_ferd_subtype 1 /* Obsolete in V16 */
533 #define UF_gfem_element_ferd_subtype 2 /* Obsolete in V16 */
534 #define UF_gfem_node_ferd_subtype 3 /* Obsolete in V16 */
535
536 #define UF_gfem_post_display_type 77 /* Obsolete in V16 */
537 #define UF_gfem_vctr_display_subtype 1 /* Obsolete in V16 */
538 #define UF_gfem_deflected_dsp_subtype 2 /* Obsolete in V16 */
539 #define UF_gfem_vctr_deflctd_dsp_subtype 4 /* Obsolete in V16 */
540
541 #define UF_gfem_post_group_type 78 /* Obsolete in V16 */
542 #define UF_gfem_post_group_subtype 0
543
544 #define UF_gfem_outline_type 79 /* Obsolete in V16 */
545 #define UF_gfem_outline_subtype 0
546
547 #define UF_gfem_local_csys_type 80 /* Obsolete in V16 */
548 #define UF_gfem_local_csys_rect_subtype 1
549 #define UF_gfem_local_csys_cyl_subtype 2
550 #define UF_gfem_local_csys_spher_subtype 3
551
552 #define UF_gfem_loader_type 81 /* Obsolete in V16 */
553 #define UF_gfem_loader_subtype 0
554
555 #define UF_sketch_tol_equation_type 82
556 #define UF_sketch_header_equ_subtype 0
557 #define UF_sketch_1_var_equ_subtype 1
558 #define UF_sketch_geo_equ_subtype 2
559 #define UF_sketch_geo2_equ_subtype 3
560 #define UF_sketch_dimension_equ_subtype 4
561 #define UF_sketch_regular_equ_subtype 5
562 #define UF_sketch_8_equ_subtype 8
563 #define UF_sketch_sym_equ_subtype 9
564 #define UF_sketch_inferred_equ_subtype 10
565
566 #define UF_sketch_tol_variable_type 83
567 #define UF_sketch_circle_ep_var_subtype 0
568 #define UF_sketch_param_pnt_var_subtype 1
569 #define UF_sketch_invisible_var_subtype 2
570 #define UF_sketch_line_slope_var_subtype 3
571 #define UF_sketch_line_angle_var_subtype 3
572 #define UF_sketch_arc_radius_var_subtype 4
573 #define UF_sketch_arc_angle_var_subtype 4
574 #define UF_sketch_bcurve_slope_var_subtype 5
575 #define UF_sketch_fixed_circle_ep_var_subtype 100
576 #define UF_sketch_fixed_param_pnt_var_subtype 101
577 #define UF_sketch_fixed_invisible_var_subtype 102
578 #define UF_sketch_fixed_line_slope_var_subtype 103
579 #define UF_sketch_fixed_line_angle_var_subtype 103
580 #define UF_sketch_fixed_arc_radius_var_subtype 104
581 #define UF_sketch_fixed_arc_angle_var_subtype 104
582 #define UF_sketch_fixed_bcurve_slope_var_subtype 105
583
584 #define UF_sketch_tol_output_reqst_type 84
585
586 #define UF_mdm_mechanism_type 85
587
588 #define UF_mdm_joint_type 86
589 #define UF_mdm_revolute_subtype 3
590 #define UF_mdm_revolute_fixed_subtype 4
591 #define UF_mdm_slider_subtype 5
592 #define UF_mdm_slider_fixed_subtype 6
593 #define UF_mdm_cylinder_subtype 7
594 #define UF_mdm_cylinder_fixed_subtype 8
595 #define UF_mdm_screw_subtype 9
596 #define UF_mdm_screw_fixed_subtype 10
597 #define UF_mdm_universal_subtype 11
598 #define UF_mdm_universal_fixed_subtype 12
599 #define UF_mdm_sphere_subtype 13
600 #define UF_mdm_sphere_fixed_subtype 14
601 #define UF_mdm_planar_subtype 15
602 #define UF_mdm_planar_fixed_subtype 16
603 #define UF_mdm_gear_subtype 17
604 #define UF_mdm_gear_fixed_subtype 18
605 #define UF_mdm_rckpn_subtype 19
606 #define UF_mdm_rckpn_fixed_subtype 20
607 #define UF_mdm_pt_crv_subtype 21
608 #define UF_mdm_pt_crv_fixed_curve_subtype 22
609 #define UF_mdm_pt_crv_fixed_point_subtype 23
610 #define UF_mdm_crv_crv_subtype 24
611 #define UF_mdm_cable_subtype 25
612 #define UF_mdm_joint_fixed_subtype 26 /* all fixed joint type*/
613 /* CV joint subtype - CV = constant velocity*/
614 #define UF_mdm_cv_subtype 27
615 #define UF_mdm_cv_fixed_subtype 28
616 #define UF_mdm_general_coupler_subtype 29
617
618 /* Joint Primitives */
619 #define UF_mdm_jprims_atpoint_subtype 111
620 #define UF_mdm_jprims_inline_subtype 112
621 #define UF_mdm_jprims_inplane_subtype 113
622 #define UF_mdm_jprims_orientation_subtype 114
623 #define UF_mdm_jprims_parallel_subtype 115
624 #define UF_mdm_jprims_perpendicular_subtype 116
625
626 #define UF_mdm_link_type 87
627
628 #define UF_mdm_spring_type 88
629 #define UF_mdm_spring_trans_2_pt_subtype 1
630 #define UF_mdm_spring_trans_slider_subtype 2
631 #define UF_mdm_spring_comp_2_pt_subtype 3
632 #define UF_mdm_spring_comp_slider_subtype 4
633 #define UF_mdm_spring_rot_rev_subtype 5
634 #define UF_mdm_spring_rot_cam_subtype 6
635 #define UF_mdm_spring_trans_cam_subtype 7
636 #define UF_mdm_spring_trans_ext_links_subtype 8
637 #define UF_mdm_spring_trans_ext_slider_subtype 9
638 #define UF_mdm_motion_vector_type 89
639
640 #define UF_mdm_force_type 90
641
642 #define UF_shaft_stress_type 91 /* Obsolete in V10 */
643
644 #define UF_mechatronics_kinematics_type 91
645 #define UF_mechatronics_rigid_body_subtype 0
646 #define UF_mechatronics_collision_body_subtype 1
647 #define UF_mechatronics_trigger_body_subtype 2
648 #define UF_mechatronics_hinge_joint_subtype 3
649 #define UF_mechatronics_sliding_joint_subtype 4
650 #define UF_mechatronics_cylindrical_joint_subtype 5
651 #define UF_mechatronics_ball_joint_subtype 6
652 #define UF_mechatronics_fixed_joint_subtype 7
653 #define UF_mechatronics_angular_spring_joint_subtype 8
654 #define UF_mechatronics_linear_spring_joint_subtype 9
655 #define UF_mechatronics_angular_limit_joint_subtype 10
656 #define UF_mechatronics_linear_limit_joint_subtype 11
657 #define UF_mechatronics_conveyor_surface_constraint_subtype 12
658 #define UF_mechatronics_speed_constraint_subtype 13
659 #define UF_mechatronics_position_constraint_subtype 14
660 #define UF_mechatronics_gear_constraint_subtype 15
661 #define UF_mechatronics_cam_constraint_subtype 16
662 #define UF_mechatronics_breaking_constraint_subtype 17
663 #define UF_mechatronics_prevent_collision_constraint_subtype 18
664 #define UF_mechatronics_change_material_constraint_subtype 19
665 #define UF_mechatronics_object_source_subtype 20
666 #define UF_mechatronics_object_sink_subtype 21
667 #define UF_mechatronics_graph_control_subtype 22
668 #define UF_mechatronics_external_connection_subtype 23
669 #define UF_mechatronics_proxy_object_subtype 24
670 #define UF_mechatronics_proxy_override_object_subtype 25
671 #define UF_mechatronics_signal_adapter_subtype 26
672 #define UF_mechatronics_adapter_signal_subtype 27
673 #define UF_mechatronics_signal_connection_subtype 28
674 #define UF_mechatronics_point_on_curve_joint_subtype 29
675 #define UF_mechatronics_curve_on_curve_joint_subtype 30
676 #define UF_mechatronics_shmsignal_connection_subtype 31
677
678 #define UF_shaft_feature_type 92 /* Obsolete in V10 */
679 #define UF_mdm_flexbody_type 92 /* Reused in NX8 */
680
681 #define UF_shaft_load_type 93 /* Obsolete in V10. Reused as UF_subdivision_mesh_type in NX9.0 */
682 #define UF_subdivision_mesh_type 93 /* Reused UF_shaft_load_type in NX9.0 */
683 #define UF_subdivision_mesh_body_subtype 1
684 #define UF_subdivision_mesh_face_subtype 2
685 #define UF_subdivision_mesh_edge_subtype 3
686 #define UF_subdivision_mesh_vertex_subtype 4
687
688 #define UF_shaft_support_type 94 /* Obsolete in V10 */
689 #define UF_extended_type 94 /* Reused in NX9 */
690 /* Prior to NX9, there was a limit (UF_max_entity_type) on the total number of object types.
691 This limit has been removed in NX9. UF_extended_type is a object type that stands for
692 all the object types over UF_max_entity_type (henceforth called extended object types).
693 This is just a dummy type to represent all the extended object types and part files will not have
694 objects of this specific type.
695 Cycling APIs that were written prior to NX9 (UF_OBJ_cycle_objs_in_part and UF_OBJ_cycle_by_name_and_type)
696 will return all the objects of type over UF_max_entity_type (the so called UF_extended_type) when UF_extended_type
697 is passed in as input.
698 */
699
700 #define UF_shaft_section_type 95 /* Obsolete in V10 */
701 #define UF_extended_displayable_type 95 /* Reused in NX9 */
702 /* Prior to NX9, there was a limit (UF_max_entity_type) on the total number of object types.
703 This limit has been removed in NX9. UF_extended_displayable_type is a object type that stands for
704 all the displayable object types over UF_max_entity_type (henceforth called extended displayable object types).
705 This is just a dummy type to represent all the extended object types and part files will not have
706 objects of this specific type.
707 Cycling APIs that were written prior to NX9 (UF_OBJ_cycle_objs_in_part and UF_OBJ_cycle_by_name_and_type)
708 will return all the displayable objects of type over UF_max_entity_type (the so called UF_extended_displayable_type)
709 when UF_extended_displayable_type is passed in as input.
710 */
711
712 #define UF_shaft_type 96 /* Obsolete in V10 */
713
714 #define UF_mdm_analysis_pt_type 97 /* Obsolete in V10 */
715
716 #define UF_mdm_marker_type 97 /* replaces UF_mdm_analysis_pt_type */
717 #define UF_mdm_inertia_marker_subtype 0
718 #define UF_mdm_user_defined_marker_subtype 1
719 #define UF_mdm_cofm_marker_subtype 2
720 #define UF_mdm_base_action_marker_subtype 3
721
722 #define UF_mdm_damper_type 98
723 #define UF_mdm_damper_2_links_subtype 6
724 #define UF_mdm_damper_slider_subtype 7
725 #define UF_mdm_damper_rot_rev_subtype 8
726
727 #define UF_mdm_torque_type 99
728 #define UF_mdm_torque_form_subtype 2
729
730 /* Reusing the UF_gfem_property_set_type. This entity type is obsoleted in v16. It gets destroyed or converted upon loading.
731 Using it for UF_mdm_constraint_type. */
732
733 #define UF_gfem_property_set_type 30
734 #define UF_gfem_property_set_form_1_subtype 1
735 #define UF_gfem_property_set_form_3_subtype 3
736 #define UF_gfem_property_set_form_7_subtype 7
737
738 #define UF_mdm_constraint_type 30 /* Reused UF_gfem_property_set_type since we no longer support GFEM */
739 #define UF_mdm_constraint_point_on_surface_subtype 2 /* Using 0 and 1 for pt_crv and crv_crv subtype that we may create in future */
740
741 #define UF_machining_operation_type 100
742 #define UF_mach_instanced_oper_subtype 1
743 #define UF_mach_orphan_oper_subtype 2
744 #define UF_mach_oldopr_subtype 10 /* Obsolete */
745 #define UF_mach_pocket_subtype 110
746 #define UF_mach_surface_contour_subtype 210
747 #define UF_mach_vasc_subtype 211
748 #define UF_mach_cavity_milling_subtype 260
749 #define UF_mach_face_milling_subtype 261
750 #define UF_mach_volumn_milling_subtype 262
751 #define UF_mach_zlevel_milling_subtype 263
752 #define UF_mach_fb_hole_milling_subtype 264
753 #define UF_mach_plunge_milling_subtype 265
754 #define UF_mach_vazl_milling_subtype 266
755 #define UF_mach_turn_rough_subtype 510
756 #define UF_mach_turn_finish_subtype 520
757 #define UF_mach_turn_teachmode_subtype 530
758 #define UF_mach_turn_thread_subtype 540
759 #define UF_mach_turn_cdrill_subtype 550
760 #define UF_mach_turn_auxiliary_subtype 560
761 #define UF_mach_hole_making_subtype 600
762 #define UF_mach_wedm_subtype 700
763 #define UF_mach_mill_ud_subtype 800
764 #define UF_mach_gmc_subtype 900
765 #define UF_mach_probing_subtype 1000
766 #define UF_mach_mill_probing_subtype 1010
767 #define UF_mach_turn_probing_subtype 1020
768 #define UF_mach_mill_tool_probing_subtype 1030
769 #define UF_mach_turn_tool_probing_subtype 1040
770 #define UF_mach_mill_mc_subtype 1100
771 #define UF_mach_lathe_mc_subtype 1200
772 #define UF_mach_wedm_mc_subtype 1300
773 #define UF_mach_lathe_ud_subtype 1400
774 #define UF_mach_wedm_ud_subtype 1500
775 #define UF_mach_mass_edit_subtype 1600
776 #define UF_mach_thread_milling_subtype 1700
777 #define UF_insp_tolerance_subtype 1800
778 #define UF_insp_path_subtype 1900
779 #define UF_insp_output_subtype 2000
780 #define UF_insp_misc_subtype 2100
781 #define UF_insp_align_subtype 2200
782 #define UF_insp_sensor_subtype 2300
783 #define UF_insp_construct_subtype 2400
784 #define UF_insp_bounding_feature_subtype 2500
785 #define UF_insp_feature_subtype 2600
786 #define UF_mach_cylinder_milling_subtype 2700
787 #define UF_mach_canned_cycle_subtype 2800
788 #define UF_mach_laser_teachmode_subtype 2900
789 #define UF_mach_hole_drilling_subtype 3000
790 #define UF_mach_groove_milling_subtype 3100
791 #define UF_mach_chamfer_milling_subtype 3200
792 #define UF_mach_radial_groove_milling_subtype 3300
793
794 #define UF_machining_path_type 101
795 #define UF_machining_path_subtype 0
796
797 #define UF_table_column_type 102
798
799 #define UF_machining_ude_map_type 103
800 #define UF_path_udem_subtype 0
801 #define UF_custom_parameters_map_subtype 1
802 #define UF_custom_parameter_subtype 2
803
804 #define UF_data_declaration_type 104
805
806 #define UF_machining_geometry_grp_type 105
807 #define UF_mill_geom_featr_subtype 10
808 #define UF_mill_bnd_featr_subtype 20
809 #define UF_mill_orient_subtype 30
810 #define UF_mill_volume_featr_subtype 35
811 #define UF_turn_geom_subtype 40
812 #define UF_turn_bnd_subtype 50
813 #define UF_turn_orient_subtype 60
814 #define UF_turn_featr_subtype 65
815 #define UF_turn_avoidance_subtype 67
816 #define UF_mach_wedm_external_group_subtype 70
817 #define UF_mach_wedm_internal_group_subtype 80
818 #define UF_mach_wedm_open_group_subtype 90
819 #define UF_mach_wedm_nocore_group_subtype 100
820 #define UF_mach_wedm_feature_group_subtype 110
821 #define UF_wedm_orient_subtype 120
822 #define UF_drill_geom_featr_subtype 130
823 #define UF_ncfeatr_udf_subtype 140
824 #define UF_ncfeatr_uda_subtype 150
825 #define UF_fbm_geom_subtype 160
826 #define UF_mill_text_featr_subtype 170
827 #define UF_blade_featr_subtype 180
828 #define UF_cylindrical_geometry_subtype 190
829 #define UF_feature_container_subtype 200
830 #define UF_cam_feature_subtype 210
831 #define UF_attribute_container_subtype 220
832
833 #define UF_machining_mach_tool_grp_type 106
834 #define UF_machining_mach_subtype 0
835 #define UF_machining_mach_turret_subtype 1
836 #define UF_machining_mach_pocket_subtype 2
837 #define UF_machining_mach_kim_subtype 3
838 #define UF_machining_mach_kim_comp_subtype 4
839 #define UF_machining_mach_kim_degof_subtype 5
840 #define UF_machining_mach_kim_junction_subtype 6
841 #define UF_machining_mach_kim_valuator_subtype 7
842 #define UF_machining_mach_sim_kim_pocket_subtype 8
843 #define UF_machining_mach_sim_kim_tool_subtype 9
844 #define UF_machining_mach_kim_main_subtype 10
845 #define UF_machining_mach_kim_display_subtype 11
846 #define UF_machining_mach_kim_collision_subtype 12
847 #define UF_machining_mach_sim_kim_main_subtype 13
848 #define UF_machining_mach_sim_kim_gouge_subtype 14
849 #define UF_machining_mach_mtb_subtype 15
850 #define UF_machining_mach_head_subtype 16
851 #define UF_machining_mach_sim_kim_ipw_subtype 17
852 #define UF_machining_mach_kim_sinucast_subtype 18
853 #define UF_machining_mach_sim_kim_subtype 19
854 #define UF_machining_mach_kim_chain_subtype 20
855 #define UF_machining_mach_kim_channel_subtype 21
856 #define UF_machining_mach_tool_config_subtype 22
857 #define UF_machining_mach_tool_cycle_subtype 23
858
859 #define UF_machining_mach_dyn_ipw_subtype 100
860 #define UF_machining_mach_dyn_ipw_turn_subtype 101
861 #define UF_machining_mach_dyn_ipw_mill_subtype 102
862 #define UF_machining_mach_kim_curve2d_subtype 200
863 #define UF_machining_mach_kim_line2d_subtype 201
864 #define UF_machining_mach_kim_arc2d_subtype 202
865 #define UF_machining_mach_selectable_path_subtype 300
866 #define UF_machining_mach_ipw_subtype 999
867
868 #define UF_machining_parameter_set_type 107
869 #define UF_mach_mill_post_cmnds_subtype 11
870 #define UF_mach_lathe_post_cmnds_subtype 13
871 #define UF_mach_wed_post_cmnds_subtype 17
872 #define UF_mach_pocket_subtype 110
873 #define UF_mach_surface_contour_subtype 210
874 #define UF_mach_vasc_subtype 211
875 #define UF_mach_gssm_main_op_subtype 220
876 #define UF_mach_gssm_sub_op_subtype 221
877 #define UF_mach_gssm_grip_subtype 222
878 #define UF_mach_param_line_subtype 230
879 #define UF_mach_zig_zag_surf_subtype 240
880 #define UF_mach_rough_to_depth_subtype 250
881 #define UF_mach_cavity_milling_subtype 260
882 #define UF_mach_lathe_rough_subtype 310
883 #define UF_mach_lathe_finish_subtype 320
884 #define UF_mach_lathe_groove_subtype 330
885 #define UF_mach_lathe_thread_subtype 340
886 #define UF_mach_drill_subtype 350
887 #define UF_mach_lathe_face_subtype 360
888 #define UF_mach_point_to_point_subtype 450
889 #define UF_mach_seq_curve_mill_subtype 460
890 #define UF_mach_seq_curve_lathe_subtype 461
891 #define UF_mach_wedm_subtype 700
892 #define UF_mach_mill_ud_subtype 800
893 #define UF_mach_mill_mc_subtype 1100
894 #define UF_mach_lathe_mc_subtype 1200
895 #define UF_mach_wedm_mc_subtype 1300
896 #define UF_mach_lathe_ud_subtype 1400
897 #define UF_mach_wedm_ud_subtype 1500
898 #define UF_mach_mass_edit_subtype 1600
899
900 #define UF_last_operation_pointer_type 108
901
902 #define UF_machining_tool_type 109
903 #define UF_mach_tool_subtype 0
904 #define UF_mach_tool_wedm_subtype 1
905 #define UF_mach_tool_assm_subtype 2
906
907 #define UF_machining_global_data_type 110
908
909 #define UF_machining_geom_type 111
910 #define UF_mach_geom_planar_mill_subtype 1
911 #define UF_mach_geom_surf_mill_subtype 2
912 #define UF_mach_geom_lathe_subtype 3
913 #define UF_mach_geom_pnt_to_pnt_subtype 4
914 #define UF_mach_geom_seq_curve_subtype 5
915 #define UF_mach_geom_seq_surf_subtype 6
916 #define UF_mach_geom_face_bnd_subtype 7
917 #define UF_mach_geom_camgeom_subtype 9
918 #define UF_mach_geom_cut_level_subtype 11
919 #define UF_mach_geom_contain_edge_subtype 12
920 #define UF_mach_geom_feature_subtype 13
921 #define UF_mach_geom_feature_list_subtype 14
922 #define UF_mach_geom_text_subtype 15
923 #define UF_mach_geom_ipw_subtype 16
924
925 #define UF_machining_null_grp_type 112
926
927 #define UF_smart_container_type 113
928 #define UF_smart_empty_container_subtype 0
929 #define UF_smart_face_container_subtype 1
930 #define UF_smart_wireframe_container_subtype 2
931 #define UF_smart_body_container_subtype 3
932 #define UF_smart_mixed_container_subtype 4
933 #define UF_smart_unknown_container_subtype 5
934 /* */
935 #define UF_smart_sc_section_subtype 6
936
937 #define UF_machining_boundary_member_type 114
938 #define UF_mach_geom_boundary_0_subtype 0
939 #define UF_mach_geom_boundary_subtype 5
940 #define UF_mach_geom_face_boundary_subtype 7
941 #define UF_mach_geom_camgeom_subtype 9
942 #define UF_mach_geom_camgeom_data_subtype 10
943
944 #define UF_machining_master_operation_type 115
945 #define UF_mach_wedm_external_trim_subtype 0
946 #define UF_mach_wedm_internal_trim_subtype 1
947 #define UF_mach_wedm_no_core_subtype 2
948 #define UF_mach_wedm_open_profile_subtype 3
949 #define UF_mach_wedm_cutoff_subtype 4
950 #define UF_mach_wedm_rough_pass_subtype 5
951 #define UF_mach_wedm_backburn_subtype 6
952 #define UF_mach_wedm_finish_trim_subtype 7
953 #define UF_mach_wedm_ext_finish_trim_subtype 8
954 #define UF_mach_wedm_subtype 700
955
956 #define UF_machining_post_command_type 116
957 #define UF_machining_mce_startup_subtype 1
958 #define UF_machining_mce_endofpath_subtype 2
959 #define UF_machining_mce_inpath_subtype 3
960 #define UF_machining_mce_wedm_startup_subtype 4
961 #define UF_machining_mce_wedm_endofpath_subtype 5
962 #define UF_machining_mce_wedm_inpath_subtype 6
963 #define UF_machining_mce_mill_mc_subtype 7
964 #define UF_machining_mce_lathe_mc_subtype 8
965 #define UF_machining_mce_wedm_mc_subtype 9
966 #define UF_machining_mce_number_subtype 10
967
968 #define UF_machining_suboperation 117
969 #define UF_mach_subop_ncm_subtype 20
970 #define UF_mach_subop_ncm_engret_subtype 21
971 #define UF_mach_subop_ncm_appdep_subtype 22
972 #define UF_mach_subop_ncm_trav_subtype 23
973 #define UF_mach_subop_region_subtype 30
974 #define UF_mach_subop_region_shape_subtype 31
975 #define UF_mach_subop_region_element_subtype 32
976 #define UF_mach_subop_blade_subtype 40
977 #define UF_mach_subop_containment_subtype 41
978 #define UF_mach_subop_floorwall_subtype 42
979 #define UF_mach_subop_tool_axis_data_subtype 43
980 #define UF_mach_subop_command_subtype 44
981 #define UF_tilt_subop_data_subtype 45
982 #define UF_mach_region_manager_subtype 46
983
984 #define UF_mach_manual_move_subtype 100
985 #define UF_mach_manual_move_data_subtype 101
986 #define UF_insp_move_subtype 200
987 #define UF_insp_move_data_subtype 201
988 #define UF_mach_laser_move_subtype 300
989 #define UF_mach_laser_move_data_subtype 301
990
991 #define UF_mach_delegate_object_subtype 400
992
993 #define UF_machining_boundary_type 118
994 #define UF_mach_geom_boundary_subtype 5
995 #define UF_mach_geom_camgeom_subtype 9
996
997 #define UF_machining_control_event_type 119
998 #define UF_cevent_motion_subtype 100
999 #define UF_cevent_end_of_path_subtype 101
1000 #define UF_cevent_start_of_path_subtype 102
1001 #define UF_cevent_start_point_output_subtype 103
1002 #define UF_cevent_mom_post_event_subtype 104
1003 #define UF_cevent_3x_linear_subtype 150
1004 #define UF_cevent_3x_linear_with_feed_subtype 151
1005 #define UF_cevent_3x_linear_cust_feed_subtype 152
1006 #define UF_cevent_5x_linear_subtype 153
1007 #define UF_cevent_5x_linear_with_feed_subtype 154
1008 #define UF_cevent_5x_linear_cust_feed_subtype 155
1009 #define UF_cevent_3x_circular_subtype 156
1010 #define UF_cevent_3x_circular_with_feed_subtype 157
1011 #define UF_cevent_3x_circular_cust_feed_subtype 158
1012 #define UF_cevent_5x_circular_subtype 159
1013 #define UF_cevent_5x_circular_with_feed_subtype 160
1014 #define UF_cevent_5x_circular_cust_feed_subtype 161
1015 #define UF_cevent_3x_helical_subtype 162
1016 #define UF_cevent_3x_helical_with_feed_subtype 163
1017 #define UF_cevent_3x_helical_cust_feed_subtype 164
1018 #define UF_cevent_5x_helical_subtype 165
1019 #define UF_cevent_5x_helical_with_feed_subtype 166
1020 #define UF_cevent_5x_helical_cust_feed_subtype 167
1021 #define UF_cevent_3x_nurbs_subtype 168
1022 #define UF_cevent_3x_nurbs_with_feed_subtype 169
1023 #define UF_cevent_3x_nurbs_cust_feed_subtype 170
1024 #define UF_cevent_5x_nurbs_subtype 171
1025 #define UF_cevent_5x_nurbs_with_feed_subtype 172
1026 #define UF_cevent_5x_nurbs_cust_feed_subtype 173
1027 #define UF_cevent_mce_fromPoint_subtype 200
1028 #define UF_cevent_mce_startPoint_subtype 201
1029 #define UF_cevent_mce_startEngage_subtype 202
1030 #define UF_cevent_mce_returnPoint_subtype 203
1031 #define UF_cevent_mce_gohomePoint_subtype 204
1032 #define UF_cevent_mce_toolChange_subtype 205
1033 #define UF_cevent_mce_origin_subtype 206
1034 #define UF_cevent_mce_seqno_subtype 207
1035 #define UF_cevent_mce_setModes_subtype 208
1036 #define UF_cevent_mce_selectHead_subtype 209
1037 #define UF_cevent_mce_cutcom_subtype 210
1038 #define UF_cevent_mce_spindleOn_subtype 211
1039 #define UF_cevent_mce_spindleOff_subtype 212
1040 #define UF_cevent_mce_coolantOn_subtype 213
1041 #define UF_cevent_mce_coolantOff_subtype 214
1042 #define UF_cevent_mce_optStop_subtype 215
1043 #define UF_cevent_mce_stop_subtype 216
1044 #define UF_cevent_mce_optSkipOn_subtype 217
1045 #define UF_cevent_mce_optSkipOff_subtype 218
1046 #define UF_cevent_mce_dwell_subtype 219
1047 #define UF_cevent_mce_cycle_subtype 220
1048 #define UF_cevent_mce_auxfun_subtype 221
1049 #define UF_cevent_mce_prefun_subtype 222
1050 #define UF_cevent_mce_clamp_subtype 223
1051 #define UF_cevent_mce_toolLengthComp_subtype 224
1052 #define UF_cevent_mce_rotate_subtype 225
1053 #define UF_cevent_mce_toolPreselect_subtype 226
1054 #define UF_cevent_mce_userDefined_subtype 227
1055 #define UF_cevent_mce_pprint_subtype 228
1056 #define UF_cevent_mce_opMessage_subtype 229
1057 #define UF_cevent_mce_goto_subtype 230
1058 #define UF_cevent_mce_threadWire_subtype 231
1059 #define UF_cevent_mce_cutWire_subtype 232
1060 #define UF_cevent_mce_flush_subtype 233
1061 #define UF_cevent_mce_flushTank_subtype 234
1062 #define UF_cevent_mce_power_subtype 235
1063 #define UF_cevent_mce_wireGuides_subtype 236
1064 #define UF_cevent_mce_wireAngle_subtype 237
1065 #define UF_cevent_mce_fedrat_subtype 238
1066 #define UF_cevent_mce_wireCutcom_subtype 239
1067 #define UF_cevent_mce_latheThread_subtype 240
1068 #define UF_cevent_mce_goDelta_subtype 241
1069 #define UF_cevent_mce_from_subtype 242
1070 #define UF_cevent_mce_goHome_subtype 243
1071 #define UF_cevent_ude_subtype 244
1072 #define UF_cevent_ud_path_subtype 245
1073 #define UF_cevent_start_of_pass_subtype 246
1074 #define UF_cevent_end_of_pass_subtype 247
1075 #define UF_cevent_mce_smoothLeadIn_subtype 248
1076 #define UF_cevent_mce_smoothLeadOut_subtype 249
1077 #define UF_cevent_mce_spindleReverse_subtype 250
1078 #define UF_cevent_mce_trackingPointChange_subtype 251
1079 #define UF_cevent_mf_message_subtype 400
1080 #define UF_cevent_mf_close_debug_files_subtype 401
1081 #define UF_cevent_mf_dump_buffers_subtype 402
1082 #define UF_cevent_mf_change_status_subtype 403
1083 #define UF_cevent_mf_last_clsf_event_subtype 404
1084 #define UF_cevent_mf_start_of_fillet_subtype 405
1085 #define UF_cevent_mf_output_gohome_subtype 406
1086 #define UF_cevent_mf_highlight_subtype 407
1087 #define UF_cevent_mf_fillet_params_subtype 408
1088 #define UF_cevent_mf_operation_name_subtype 409
1089 #define UF_cevent_mf_tldata_subtype 410
1090 #define UF_cevent_mf_msys_subtype 411
1091 #define UF_cevent_mf_list_deletion_subtype 413
1092 #define UF_cevent_mf_local_return_start_subtype 414
1093 #define UF_cevent_mf_local_return_end_subtype 415
1094 #define UF_cevent_mf_display_font_subtype 416
1095 #define UF_cevent_mf_slowdown_params_subtype 417
1096 #define UF_cevent_mf_cut_level_plane_subtype 418
1097 #define UF_cevent_mf_counter_value_subtype 419
1098 #define UF_cevent_mf_gouge_subtype 420
1099 #define UF_cevent_mf_unpropagable_event_subtype 421
1100 #define UF_cevent_scud_updown_cut_subtype 600
1101 #define UF_cevent_set_marker_subtype 601
1102 #define UF_cevent_manual_pattern_action_subtype 602
1103 #define UF_cevent_udc_subtype 603
1104 #define UF_cevent_udc_off_subtype 604
1105 #define UF_mach_sync_event_subtype 700
1106
1107 #define UF_machining_ncm_type 120
1108 #define UF_mach_ncm_subtype 10
1109 #define UF_mach_ncm_point_subtype 20
1110 #define UF_mach_ncm_engret_subtype 30
1111 #define UF_mach_ncm_transfer_subtype 40
1112 #define UF_mach_ncm_clgeom_subtype 50
1113
1114 #define UF_machining_task_type 121
1115 #define UF_mach_order_task_subtype 160
1116 #define UF_mach_clsf_task_subtype 161
1117 #define UF_mach_optim_task_subtype 162
1118
1119 #define UF_machining_setup_type 122
1120 #define UF_mach_setup_subtype 0
1121 #define UF_insp_setup_subtype 10
1122
1123 #define UF_machining_feedrate_type 123
1124
1125 #define UF_machining_display_type 124
1126
1127 #define UF_machining_dp_type 125
1128 #define UF_mach_dp_none_subtype 0
1129 #define UF_mach_dp_point_subtype 10
1130 #define UF_mach_dp_curve_subtype 20
1131 #define UF_mach_dp_surface_subtype 30
1132 #define UF_mach_dp_boundary_subtype 40
1133 #define UF_mach_dp_tool_path_subtype 50
1134 #define UF_mach_dp_radial_curve_subtype 60
1135 #define UF_mach_dp_spiral_subtype 70
1136 #define UF_mach_dp_ud_subtype 80
1137 #define UF_mach_dpm_none_subtype 100
1138 #define UF_mach_dpm_amill_subtype 110
1139 #define UF_mach_dpm_curve_subtype 120
1140 #define UF_mach_dpm_surface_subtype 130
1141 #define UF_mach_dpm_interpolated_tool_path_subtype 135
1142 #define UF_mach_dpm_boundary_subtype 140
1143 #define UF_mach_dpm_tool_path_subtype 150
1144 #define UF_mach_dpm_radial_curve_subtype 160
1145 #define UF_mach_dpm_spiral_subtype 170
1146 #define UF_mach_dpm_ud_subtype 180
1147 #define UF_mach_dpm_fcut_subtype 190
1148 #define UF_mach_dpm_line_subtype 191
1149 #define UF_mach_dpm_arc_subtype 192
1150 #define UF_mach_dpm_text_subtype 193
1151 #define UF_mach_dpm_motions_subtype 194
1152 #define UF_mach_dpm_contour_subtype 200
1153 #define UF_mach_dpm_blade_rough_subtype 300
1154 #define UF_mach_dpm_blade_finish_subtype 400
1155 #define UF_mach_dpm_hub_finish_subtype 500
1156 #define UF_mach_dpm_blend_finish_subtype 600
1157 #define UF_mach_dpm_edge_finish_subtype 700
1158
1159 #define UF_machining_pathindex_type 126
1160 #define UF_machining_tool_path_subtype 0
1161 #define UF_machining_contact_path_subtype 1
1162
1163 #define UF_machining_tldsp_type 127
1164
1165 #define UF_machining_mode_type 128
1166 #define UF_mach_mode_subtype 0
1167 #define UF_mach_mill_mode_subtype 10
1168 #define UF_mach_lathe_mode_subtype 20
1169 #define UF_mach_drill_mode_subtype 30
1170 #define UF_mach_wedm_mode_subtype 40
1171 #define UF_mach_turn_mode_subtype 100
1172
1173 #define UF_machining_mthd_type 128
1174 #define UF_mach_mthd_subtype 0
1175 #define UF_mach_mill_mthd_subtype 10
1176 #define UF_mach_lathe_mthd_subtype 20
1177 #define UF_mach_drill_mthd_subtype 30
1178 #define UF_mach_wedm_mthd_subtype 40
1179 #define UF_mach_turn_mthd_subtype 100
1180 #define UF_mach_hole_mthd_subtype 110
1181 #define UF_insp_mthd_subtype 120
1182 #define UF_mach_laser_mthd_subtype 130
1183
1184 #define UF_machining_clip_type 129
1185
1186 #define UF_render_set_type 130
1187
1188 #define UF_sketch_tol_csys_type 131
1189 #define UF_sketch_tol_csys_rect_subtype 1
1190 #define UF_sketch_tol_csys_cyl_subtype 2
1191 #define UF_sketch_tol_csys_spher_subtype 3
1192
1193 #define UF_sketch_tol_feature_type 132 /* Obsolete in V10 */
1194 #define UF_component2d_definition_type 132 /* Reused in NX9 */
1195
1196 #define UF_sketch_tol_mating_type 133 /* Obsolete in V10 */
1197
1198 #define UF_sketch_type 134
1199 #define UF_v9_sketch_subtype 0
1200 #define UF_v13_sketch_subtype 1
1201 #define UF_extracted_sketch_subtype 2
1202
1203 #define UF_ordinate_margin_type 135
1204 #define UF_ord_margin_horizontal_subtype 13
1205 #define UF_ord_margin_vertical_subtype 14
1206
1207 #define UF_phys_material_type 136
1208
1209 #define UF_ug_libraries_type 137
1210
1211 #define UF_faceted_model_data_type 138
1212
1213 #define UF_faceted_model_type 139
1214 #define UF_faceted_model_normal_subtype 0
1215 #define UF_faceted_model_cloud_subtype 1
1216 #define UF_faceted_model_promoted_subtype 2
1217 #define UF_faceted_model_jt_body_subtype 3
1218 #define UF_faceted_model_face_subtype 4
1219 #define UF_faceted_model_edge_subtype 5
1220 #define UF_faceted_model_map_subtype 6
1221
1222 #define UF_flange_type 140
1223 #define UF_flange_0_subtype 0
1224 #define UF_flange_1_subtype 1
1225
1226 #define UF_bend_type 141
1227 #define UF_bend_0_subtype 0
1228 #define UF_bend_2_subtype 2
1229
1230 #define UF_flat_pattern_type 142
1231 #define UF_flat_pattern_subtype 0
1232 #define UF_flat_pattern_user_subtype 1
1233
1234 #define UF_sheet_metal_type 143
1235
1236 #define UF_table_type 144
1237 #define UF_table_smd_subtype 0
1238 #define UF_table_fam_subtype 1
1239
1240 #define UF_mdm_genforce_type 145
1241 #define UF_mdm_bush_subtype 0
1242 #define UF_mdm_vforce_subtype 1
1243 #define UF_mdm_vtorque_subtype 2
1244 #define UF_mdm_contact_subtype 3
1245
1246 #define UF_sfem_composite_type 146
1247 #define UF_sfem_composite_body_subtype 0
1248 #define UF_sfem_composite_face_subtype 2
1249 #define UF_sfem_composite_edge_subtype 3
1250 #define UF_sfem_composite_vertex_subtype 4
1251 #define UF_sfem_composite_subface_subtype 5
1252 #define UF_sfem_composite_subedge_subtype 6
1253
1254 #define UF_cam_cut_method_type 147
1255
1256 #define UF_dimension_set_type 148
1257 #define UF_dim_chain_subtype 0
1258 #define UF_dim_baseline_subtype 1
1259
1260 #define UF_display_object_type 149
1261
1262 #define UF_mdm_curve_curve_contact_type 150
1263
1264 #define UF_prefix1_type 151 /* Obsolete in V10, reused by UF_drafting_supplemental_geometry_type */
1265 #define UF_drafting_supplemental_geometry_type 151
1266 #define UF_drafting_region_subtype 0
1267 #define UF_drafting_direction_subtype 1
1268
1269 #define UF_symbol_master_type 152 /* Obsolete in V10, reused by UF_drafting_break_type */
1270 #define UF_drafting_break_type 152
1271
1272 #define UF_logic_part_master_type 153 /* Obsolete in V10 */
1273 #define UF_drafting_search_type 153
1274 #define UF_drafting_search_criteria_type 0
1275
1276 #define UF_draft_callout_type 154
1277
1278 #define UF_smsp_product_definition_type 155
1279 #define UF_smsp_product_definition_subtype 0
1280 #define UF_smsp_product_definition_geom_subtype 1
1281 #define UF_smsp_group_subtype 2
1282 #define UF_smsp_root_subtype 3
1283 #define UF_smsp_product_attribute_subtype 4
1284 #define UF_smsp_product_value_subtype 5
1285 #define UF_smsp_business_modifier_subtype 6
1286 #define UF_pmi_associated_objects_group_subtype 7
1287 #define UF_smsp_drafting_attribute_subtype 8
1288
1289 #define UF_symbol_type 156 /* Obsolete in V10, reused by UF_drafting_body_type */
1290 #define UF_drafting_body_type 156
1291
1292 #define UF_logic_part_type 157 /* Obsolete in V10 */
1293 #define UF_drawing_template_region_type 157
1294 #define UF_drawing_template_region_subtype 0
1295
1296 #define UF_smart_model_instance_type 158
1297 #define UF_combined_attribute_instance_subtype 0
1298 #define UF_user_defined_attribute_instance_subtype 1
1299 #define UF_smart_model_instance_mark_subtype 2 /* Obsolete in NX5 */
1300 #define UF_combined_drafting_instance_subtype 2
1301 #define UF_user_defined_drafting_instance_subtype 3
1302
1303 #define UF_datum_reference_frame_type 159
1304 #define UF_single_subtype 0
1305 #define UF_composite_subtype 1
1306
1307 #define UF_constraint_type 160 /* Was obsolete in V10 as UF_net_type */
1308 #define UF_constraint_subtype 0
1309 #define UF_component_constraint_subtype 1
1310 #define UF_displayed_constraint_subtype 2
1311 #define UF_component_constraint_group_subtype 3
1312
1313 #define UF_distance_constraint_subtype 3
1314 #define UF_angle_constraint_subtype 4
1315 #define UF_radius_constraint_subtype 5
1316 #define UF_parallel_constraint_subtype 6
1317 #define UF_perpendicular_constraint_subtype 7
1318 #define UF_coincident_constraint_subtype 8
1319 #define UF_tangent_constraint_subtype 9
1320 #define UF_equal_radius_constraint_subtype 10
1321 #define UF_fixed_constraint_subtype 11
1322 #define UF_symmetric_constraint_subtype 12
1323 #define UF_rigid_constraint_subtype 13
1324 #define UF_concentric_constraint_subtype 14
1325 #define UF_coplanar_constraint_subtype 15
1326 #define UF_coaxial_constraint_subtype 16
1327 #define UF_wallthickness_constraint_subtype 17
1328
1329 #define UF_connection1_type 161 /* Obsolete in V10 */
1330
1331 #define UF_mechatronics_data_type 161
1332 #define UF_mechatronics_collision_material_subtype 0
1333 #define UF_mechatronics_function_table_subtype 1
1334 #define UF_mechatronics_function_subtype 2
1335 #define UF_mechatronics_sequence_editor_operation_subtype 3
1336 #define UF_mechatronics_sequence_editor_trigger_subtype 4
1337 #define UF_mechatronics_runtime_behavior_subtype 5
1338 #define UF_mechatronics_function_parm_subtype 6
1339 #define UF_mechatronics_function_comp_container_subtype 7
1340 #define UF_mechatronics_function_oper_container_subtype 8
1341 #define UF_mechatronics_sequence_editor_parameter_subtype 9
1342 #define UF_mechatronics_sequence_editor_condition_subtype 10
1343 #define UF_mechatronics_logic_subtype 11
1344 #define UF_mechatronics_requirement_subtype 12
1345 #define UF_mechatronics_runtime_formula_subtype 13
1346 #define UF_mechatronics_adapter_formula_subtype 14
1347 #define UF_mechatronics_physics_preference_subtype 15
1348 #define UF_mechatronics_physics_folder_object_subtype 16
1349 #define UF_mechatronics_physics_folder_locator_subtype 17
1350 #define UF_mechatronics_system_root_subtype 18
1351 #define UF_mechatronics_link_manager_subtype 19
1352 #define UF_mechatronics_electrical_part_subtype 20
1353 #define UF_mechatronics_runtime_nc_subtype 21
1354 #define UF_mechatronics_segment_table_subtype 22
1355
1356 #define UF_node_type 162 /* Obsolete in V10 */
1357
1358 #define UF_report_net_list_type 163 /* Obsolete in V10 */
1359
1360 #define UF_traceline_type 164 /* Was obsolete in V10 as component list */
1361 #define UF_traceline_automatic_subtype 1
1362 #define UF_traceline_curves_subtype 2
1363
1364 #define UF_tabular_note_type 165
1365 #define UF_tabular_note_section_subtype 0
1366 #define UF_tabular_note_subtype 1
1367 #define UF_tabular_note_row_subtype 2
1368 #define UF_tabular_note_column_subtype 3
1369 #define UF_parts_list_subtype 11
1370 #define UF_parts_list_row_subtype 12
1371 #define UF_parts_list_column_subtype 13
1372 #define UF_spline_gear_table_subtype 21
1373 #define UF_spline_gear_row_subtype 22
1374 #define UF_spline_gear_column_subtype 23
1375
1376 #define UF_fmbd_cut_sheet_subtype 24
1377 #define UF_fmbd_cut_sheet_row_subtype 25
1378 #define UF_fmbd_cut_sheet_column_subtype 26
1379 #define UF_fmbd_cut_sheet_header_row_subtype 27
1380 #define UF_fmbd_cut_sheet_cell_subtype 28
1381
1382 #define UF_fmbd_object_attribute_subtype 29
1383 #define UF_fmbd_object_attribute_row_subtype 30
1384 #define UF_fmbd_object_attribute_column_subtype 31
1385 #define UF_fmbd_object_attribute_cell_subtype 32
1386
1387 #define UF_fmbd_pin_list_subtype 33
1388 #define UF_fmbd_pin_list_row_subtype 34
1389 #define UF_fmbd_pin_list_column_subtype 35
1390 #define UF_fmbd_pin_list_header_row_subtype 36
1391 #define UF_fmbd_pin_list_cell_subtype 37
1392
1393 #define UF_tabular_hole_table_subtype 38
1394 #define UF_tabular_hole_table_row_subtype 39
1395 #define UF_tabular_hole_table_col_subtype 40
1396
1397 #define UF_bend_table_subtype 41
1398 #define UF_bend_table_row_subtype 42
1399 #define UF_bend_table_column_subtype 43
1400
1401 #define UF_cam_material_type 166
1402
1403 #define UF_rlist_type 167
1404 #define UF_rlist_list_subtype 1
1405 #define UF_rlist_format_subtype 2
1406 #define UF_rlist_filter_subtype 3
1407 #define UF_fmbd_annotation_subtype 4
1408
1409 #define UF_route_route_type 168
1410 #define UF_route_wire_subtype 1
1411 #define UF_route_harness_subtype 2
1412 #define UF_route_path_subtype 3
1413 #define UF_route_path_fmbd_subtype 4
1414 #define UF_route_path_offset_subtype 5
1415 #define UF_route_built_in_path_subtype 6
1416 #define UF_route_cable_subtype 7
1417 #define UF_route_jumper_wire_subtype 8
1418 #define UF_route_segment_set_subtype 9
1419 #define UF_route_subroute_subtype 10
1420
1421 /* <jfc> Analysis objects */
1422 #define UF_analysis_type 169
1423 #define UF_dynamic_deviation_subtype 0
1424 #define UF_surface_section_subtype 1
1425 #define UF_multi_section_subtype 2
1426 #define UF_highlight_lines_subtype 3
1427 #define UF_surf_deviation_subtype 4
1428 #define UF_gap_flushness_subtype 5
1429 #define UF_curve_continuity_subtype 6
1430 #define UF_cross_section_subtype 7
1431 #define UF_curve_curvature_subtype 8
1432 #define UF_surface_intersection_subtype 9
1433 #define UF_draft_analysis_subtype 10
1434 #define UF_trim_angle_check_subtype 11
1435 #define UF_local_radius_analysis_subtype 12
1436 #define UF_mold_flow_moldex3d_subtype 13
1437 #define UF_face_curvature_subtype 14
1438
1439
1440 /* Web Express based Report Writer used in Scenario */
1441 #define UF_report_type 170
1442 #define UF_report_scenario_subtype 0
1443
1444 #define UF_cam_type 171 /* Obsolete in V10 Reused */
1445 #define UF_shed_material_type 171 /* NX 6 */
1446
1447 #define UF_cam_body_type 172 /* Obsolete in V10 - Reused */
1448 #define UF_route_fitting_overstock_type 172 /* NX 7.5 */
1449
1450 #define UF_cam_follower_type 173 /* Obsolete in V10 */
1451
1452 /* #define UF_cam_function_type 174 Obsolete in V10 */
1453 #define UF_machining_mfgftr_type 174
1454
1455 #define UF_cam_solid_cross_section 175
1456
1457 #define UF_mdm_contact_type 176 /* For Motion contacts*/
1458 #define UF_mdm_3d_contact_subtype 0
1459
1460 #define UF_drafting_image_type 177
1461
1462 #define UF_tracking_point_type 178
1463 #define UF_cutter_tracking_point_subtype 0
1464 #define UF_mill_tracking_point_subtype 1
1465 #define UF_turn_tracking_point_subtype 2
1466 #define UF_standard_tracking_point_subtype 3
1467 #define UF_probe_tracking_point_subtype 4
1468 #define UF_tool_holder_type 179
1469
1470 #define UF_material_type 180
1471 #define UF_cgfx_material_subtype 1
1472
1473 #define UF_texture_type 181
1474
1475 #define UF_light_source_type 182
1476
1477 #define UF_curve_group_type 183
1478 #define UF_dropped_edge_group_subtype 0
1479 #define UF_simplified_group_subtype 1
1480 #define UF_invis_solid_record_subtype 2
1481 #define UF_dropped_curve_group_subtype 3
1482 #define UF_InterferenceCurveGroupSubtype 4
1483
1484 #define UF_general_face_set_type 184
1485
1486 #define UF_anim_traj_type 185
1487
1488 #define UF_sheet_group_type 186
1489
1490 #define UF_cs2_rigid_set_type 187
1491
1492 #define UF_design_rule_type 188
1493 #define UF_design_rule_rule_subtype 0
1494 #define UF_design_rule_violation_subtype 1
1495 #define UF_design_rule_override_subtype 2
1496 #define UF_design_rule_function_subtype 3
1497 #define UF_design_rule_location_subtype 4
1498
1499 #define UF_thd_symbolic_data_type 189
1500
1501 #define UF_foreign_surf_type 190
1502
1503 #define UF_user_defined_object_type 191
1504
1505 #define UF_generic_entity_type UF_user_defined_object_type
1506
1507 #define UF_generic_ent_int_sub_ent_type 192 /* Obsolete in V10 */
1508 #define UF_part_field_type 192
1509 #define UF_part_field_connectivity_subtype 0
1510 #define UF_part_field_depvariable_subtype 1
1511 #define UF_part_field_expression_subtype 2
1512 #define UF_part_field_formula_subtype 3
1513 #define UF_part_field_link_subtype 4
1514 #define UF_part_field_table_subtype 5
1515 #define UF_part_field_links_table_subtype 6
1516 #define UF_part_field_reference_subtype 7
1517
1518 #define UF_generic_ent_real_sub_ent_type 193 /* Obsolete in V10 */
1519 #define UF_asso_param_object_type 193
1520 #define UF_asso_param_object_subtype 0
1521 #define UF_asso_param_object_group_subtype 1
1522
1523 #define UF_symbol_font_type 194
1524
1525 #define UF_dataum_point_type 195 /* not use */
1526
1527 #define UF_datum_axis_type 196
1528
1529 #define UF_datum_plane_type 197
1530
1531 #define UF_solid_section_type 198
1532
1533 #define UF_section_edge_type 199
1534 #define UF_section_edge_0_subtype 1
1535 #define UF_section_edge_1_subtype 1
1536
1537 #define UF_section_segment_type 200
1538 #define UF_arrow_segment_subtype 1
1539 #define UF_cut_segment_subtype 2
1540 #define UF_bend_segment_subtype 3
1541
1542 #define UF_solid_silhouette_type 201
1543 #define UF_solid_silhouette_sl_subtype 0
1544 #define UF_solid_silhouette_uvhatch_subtype 1
1545 #define UF_vicurve_subtype 2
1546
1547 #define UF_section_line_type 202
1548 #define UF_simple_section_line_subtype 1
1549 #define UF_stepped_section_line_subtype 2
1550 #define UF_aligned_section_line_subtype 3
1551 #define UF_half_section_line_subtype 4
1552 #define UF_unfolded_section_line_subtype 5
1553 #define UF_breakline_subtype 6
1554 #define UF_folded_section_line_subtype 7
1555
1556 #define UF_solid_in_view_type 203
1557
1558 #define UF_component_set_type 204
1559
1560 #define UF_feature_type 205
1561 #define UF_feature_subtype 0
1562
1563 #define UF_zone_type 206
1564 #define UF_zone_box_subtype 0
1565 #define UF_zone_plane_subtype 1
1566 #define UF_zone_display_subtype 2
1567
1568 #define UF_filter_type 207
1569 #define UF_general_filter_subtype 0
1570 #define UF_component_filter_subtype 1
1571
1572 #define UF_promotion_type 208
1573 #define UF_promotion_subtype 0
1574
1575 #define UF_mdm_measure_type 209
1576
1577 #define UF_mdm_trace_type 210
1578
1579 #define UF_mdm_interference_type 211
1580
1581 #define UF_script_type 212
1582
1583 #define UF_spreadsheet_type 213
1584 #define UF_spreadsheet_xess_subtype 0
1585 #define UF_spreadsheet_excel_subtype 1
1586
1587 #define UF_reference_type 214 /* obsolete */
1588 #define UF_view_alignment_type 214
1589
1590 #define UF_scalar_type 215
1591
1592 #define UF_offset_type 216
1593
1594 #define UF_direction_type 217
1595
1596 #define UF_parametric_text_type 218
1597 #define UF_tabular_note_cell_subtype 2
1598 #define UF_parts_list_cell_subtype 12
1599 #define UF_spline_gear_cell_subtype 22
1600
1601 #define UF_xform_type 219
1602
1603 #define UF_route_control_point_type 220
1604
1605 #define UF_route_port_type 221
1606
1607 #define UF_route_segment_type 222 /* obsolete in NX1 */
1608 #define UF_mdm_sensor_type 222 /* Added for Sensor */
1609 #define UF_mdm_sensor_displacement_subtype 0
1610 #define UF_mdm_sensor_velocity_subtype 1
1611 #define UF_mdm_sensor_acceleration_subtype 2
1612 #define UF_mdm_sensor_force_subtype 3
1613 #define UF_mdm_sensor_torque_subtype 4
1614
1615 #define UF_route_connection_type 223
1616
1617 #define UF_route_stock_type 224
1618 #define UF_route_stock_subtype 0
1619 #define UF_route_overstock_subtype 1
1620 #define UF_route_filler_subtype 2
1621 #define UF_route_stock_transition_subtype 3
1622
1623 #define UF_route_part_anchor_type 225
1624
1625 #define UF_route_cross_section_type 226
1626
1627 #define UF_route_stock_data_type 227
1628
1629 #define UF_route_corner_type 228
1630 #define UF_route_corner_subtype 999
1631 #define UF_route_bend_corner_subtype 0
1632 #define UF_route_miter_corner_subtype 1
1633 #define UF_route_cope_corner_subtype 2
1634 #define UF_route_disc_corner_subtype 3
1635 #define UF_route_sbend_corner_subtype 4
1636
1637 #define UF_route_part_type_type 229
1638
1639 #define UF_fam_type 230
1640 #define UF_fam_subtype 0
1641 #define UF_fam_part_subtype 1
1642
1643 /* */
1644
1645 #define UF_fam_attr_type 231
1646 #define UF_fam_attr_text_subtype 1
1647 #define UF_fam_attr_numeric_subtype 2
1648 #define UF_fam_attr_integer_subtype 3
1649 #define UF_fam_attr_double_subtype 4
1650 #define UF_fam_attr_string_subtype 5
1651 #define UF_fam_attr_part_subtype 6
1652 #define UF_fam_attr_name_subtype 7
1653 #define UF_fam_attr_instance_subtype 8
1654 #define UF_fam_attr_exp_subtype 9
1655 #define UF_fam_attr_mirror_subtype 10
1656 #define UF_fam_attr_density_subtype 11
1657 #define UF_fam_attr_feature_subtype 12
1658 #define UF_fam_attr_mass_subtype 13
1659 #define UF_fam_attr_material_subtype 14
1660
1661 #define UF_sfem_mesh_type 232
1662 #define UF_sfem_generic_mesh_subtype 0
1663 #define UF_sfem_trans_mesh_subtype 1
1664 #define UF_sfem_mesh_nodes_subtype 2
1665 #define UF_sfem_super_element_subtype 3
1666
1667 #define UF_sfem_mesh_recipe_type 233 /* Obsolete in NX4 */
1668 #define UF_sfem_generic_mesh_recipe_subtype 0
1669 #define UF_sfem_weld_mesh_recipe_subtype 1
1670 #define UF_sfem_connection_mesh_recipe_subtype 2
1671 #define UF_sfem_conn_weld_mesh_recipe_subtype 3
1672 #define UF_sfem_2d_contact_mesh_recipe_subtype 4
1673
1674 #define UF_faceset_type 234
1675
1676 #define UF_sfem_mesh_geometry_type 235
1677 #define UF_sfem_mesh_geometry_body_subtype 0
1678 #define UF_sfem_mesh_geometry_face_subtype 1
1679 #define UF_sfem_mesh_geometry_edge_subtype 2
1680 #define UF_sfem_mesh_geometry_curve_subtype 3
1681 #define UF_sfem_mesh_geometry_point_subtype 4
1682 #define UF_sfem_mesh_geometry_comp_body_subtype 5
1683 #define UF_sfem_mesh_geometry_comp_face_subtype 6
1684 #define UF_sfem_mesh_geometry_comp_edge_subtype 7
1685
1686 #define UF_feature_cache_type 236
1687
1688 #define UF_sfem_load_type 237 /* Obsolete in NX4 */
1689 #define UF_mdm_motor_type 237 /* Added for Motor */
1690 #define UF_mdm_pmdc_velocity_subtype 0
1691 #define UF_mdm_pmdc_torque_subtype 1
1692
1693 #define UF_sfem_bndcond_type 238 /* Obsolete in NX4 */
1694 #define UF_response_simulation_type 238
1695 #define UF_ra_sensor_subtype 1
1696 #define UF_ra_strain_gage_subtype 2
1697
1698 #define UF_sfem_property_type 239
1699 #define UF_sfem_generic_property_subtype 1
1700 #define UF_sfem_mat_property_subtype 2
1701 #define UF_sfem_sect_property_subtype 3
1702 #define UF_sfem_property_proxy_subtype 4
1703
1704 #define UF_sfem_property_name_type 240
1705
1706 #define UF_axis_type 241
1707
1708 #define UF_cs2_vertex_type 242
1709
1710 #define UF_cs2_constraint_type 243
1711 #define UF_cs2_simple_subtype 0
1712 #define UF_cs2_dim_subtype 1
1713 #define UF_cs2_helped_subtype 2
1714 #define UF_cs2_dim_helped_subtype 3
1715 #define UF_cs2_string_constraint_subtype 4
1716 #define UF_cs2_trim_constraint_subtype 5
1717 #define UF_cs2_offset_constraint_subtype 6
1718 #define UF_cs2_equation_constraint_subtype 7
1719 #define UF_cs2_pgm_offset_constraint_subtype 8
1720 #define UF_cs2_point_on_loop_subtype 9
1721 #define UF_cs2_recipe_trim_subtype 10
1722 #define UF_cs2_pattern_constraint_subtype 11
1723 #define UF_cs2_polygon_constraint_subtype 12
1724 #define UF_cs2_pattern_value_constraint_subtype 13
1725 #define UF_cs2_rigid_set_subtype 14
1726
1727 #define UF_cs2_constraint_system_type 244
1728 #define UF_cs2_temporary_cs_subtype 0
1729 #define UF_cs2_permanent_cs_subtype 1
1730
1731 #define UF_attribute_category_type 245 /* Obsolete in NX7 */
1732 #define UF_attribute_password_type 245 /* Obsolete in NX7 */
1733
1734 #define UF_attribute_type 246 /* Obsolete in NX7 */
1735 #define UF_string_attribute_subtype 1 /* Obsolete in NX7 */
1736 #define UF_integer_attribute_subtype 2 /* Obsolete in NX7 */
1737 #define UF_scalar_attribute_subtype 3 /* Obsolete in NX7 */
1738 #define UF_length_attribute_subtype 4 /* Obsolete in NX7 */
1739 #define UF_area_attribute_subtype 5 /* Obsolete in NX7 */
1740 #define UF_volume_attribute_subtype 6 /* Obsolete in NX7 */
1741 #define UF_date_attribute_subtype 7 /* Obsolete in NX7 */
1742 #define UF_reference_attribute_subtype 8 /* Obsolete in NX7 */
1743 #define UF_null_attribute_subtype 9 /* Obsolete in NX7 */
1744
1745 #define UF_note_type 247
1746 #define UF_general_note_subtype 0
1747 #define UF_appended_text_subtype 1
1748 #define UF_limit_or_fit_subtype 2
1749
1750 #define UF_tol_feature_instance_type 248
1751 #define UF_feature_instance_subtype 0
1752 #define UF_datum_identifier_instance_subtype 1
1753 #define UF_datum_point_instance_subtype 2
1754 #define UF_datum_line_instance_subtype 3
1755 #define UF_datum_area_instance_subtype 4 /* obsolete in V15.0 */
1756 #define UF_rectangular_area_instance_subtype 5
1757 #define UF_circular_area_instance_subtype 6
1758 #define UF_cylindrical_area_instance_subtype 7
1759 #define UF_directed_datum_ident_instance_subtype 8
1760 #define UF_user_defined_area_instance_subtype 9
1761 #define UF_complex_feature_instance_subtype 10
1762 #define UF_table_instance_subtype 11
1763
1764 #define UF_engineering_text_type 249
1765
1766 #define UF_annotation_type 250 /* obsolete in NX4 */
1767 #define UF_pmi_filter_type 250
1768 #define UF_pmi_filter_all_subtype 0
1769 #define UF_pmi_filter_by_type_subtype 1
1770 #define UF_pmi_filter_by_view_subtype 2
1771
1772 #define UF_tolerance_feature_type 251
1773 #define UF_tolerance_model_subtype 0
1774 #define UF_tolerance_feature_subtype 1
1775 #define UF_complex_tolerance_feature_subtype 2
1776 #define UF_complex_tolerance_subfeature_subtype 3
1777 #define UF_datum_object_subtype 4
1778
1779 #define UF_leader_type 252 /* There are no subtypes for this object */
1780
1781 #define UF_engineering_symbol_type 253
1782 #define UF_symbol_instance_subtype 0
1783
1784 #define UF_feature_control_frame_type 254
1785 #define UF_straightness_subtype 0
1786 #define UF_flatness_subtype 1
1787 #define UF_circular_subtype 2
1788 #define UF_cylindrical_subtype 3
1789 #define UF_line_profile_subtype 4
1790 #define UF_surface_profile_subtype 5
1791 #define UF_angular_subtype 6
1792 #define UF_perpendicular_subtype 7
1793 #define UF_parallel_subtype 8
1794 #define UF_position_subtype 9
1795 #define UF_concentric_subtype 10
1796 #define UF_symmetric_subtype 11
1797 #define UF_circular_runout_subtype 12
1798 #define UF_total_runout_subtype 13
1799
1800 /* type and subtypes for NX3 post processor */
1801 #define UF_sfpp_post_type 255
1802 #define UF_sfpp_post_display_subtype 0
1803 #define UF_sfpp_post_def_fringe_subtype 1
1804 #define UF_sfpp_post_def_face_subtype 2
1805 #define UF_sfpp_post_def_edge_subtype 3
1806 #define UF_sfpp_post_undef_face_subtype 4
1807 #define UF_sfpp_post_undef_edge_subtype 5
1808
1809 /* Incremented max_entity_type after adding the types above - Amit */
1810 #define UF_max_entity_type 255
1811
1812 /* */
1813
1814 /* special selection subtypes */
1815 #define UF_all_subtype (-1)
1816 #define UF_member_subtype (-2) /* to be obsoleted,
1817 use filter function to filter members out if needed */
1818
1819
1820 #ifdef __cplusplus
1821 }
1822 #endif
1823
1824 #endif /* UF_OBJECT_TYPES_H_INCLUDED */