TokuDB · 源码分析 · 一条query语句的执行过程

Mysql是基于代价cost来选择索引,如果一个表有好几个索引,optimizer会分别计算每个索引访问的代价,选择代价最小的索引进行访问,这个索引也被称为access path。

Pickup index

Mysql在执行query语句的时候会在server层计算每个可选索引的代价,并选择代价最小的索引作为访问路径(access path)去引擎读取数据。
server层的handler类为引擎层提供一个框架来计算索引的代价。

  1. scan_time:计算全表扫描需要执行时间
  2. records_in_range:计算索引在search condition范围内包含多少行数据
  3. read_time:计算索引range query执行时间

Tokudb的records_in_range:根据search condition区间的大小做不同的处理。

  • 如果search condition为NULL,并且start_key和end_key均为NULL,这个函数调用estimate_num_rows去读ft的内存统计信息in_memory_stats.numrows,得到索引有多少个<key,value>pair,也即unique key的个数。因为mysql的二级索引的key都会拼上pk,到了索引层所有的key都是unique的。
  • 把search condition的start_key和end_key封装成ft的key,调用ft的keys_range64函数计算落在<start_key,end_key>区间的key个数。less表示小于start_key的个数,equal1表示等于start_key的个数,middle表示大于等于start key且小于end_key的个数,equal2表示等于end_key的个数,greater表示大于等于end_key的个数。这个函数递归计算,代码比较多,但是不复杂。
  • 如果start_key和end_key落在同一个basement节点,就读取那个basement节点并把满足条件的记录条数返回给server层。
  • 如果search conditionn跨越多个basement节点,就需要把索引中存储的键值key个数(in_memory_stats.numrows)分摊到从root到leaf路径上的每一层节点上,这样得到每一层节点的权重。然后把start_key到end_key区间在每一层节点上的权重累加起来得到区间的记录条数。

当start_key和end_key不在同一个basement节点时,keys_range64是通过估算得到记录条数的。
估算的值受FT tree layout影响,FT tree可以是瘦高的,也可以是扁平的,不同的layout计算的结果可能会差别比较大。
而且,tokudb的键值key个数(in_memory_stats.numrows)也是个统计值,是每次在leaf节点做msn apply更新的,这个值也可能不准确。

ha_rows ha_tokudb::records_in_range(uint keynr, key_range* start_key, key_range* end_key) {
    DBT *pleft_key, *pright_key;
    DBT left_key, right_key;
    ha_rows ret_val = HA_TOKUDB_RANGE_COUNT;
    DB *kfile = share->key_file[keynr];
    uint64_t rows = 0;
    int error;

    // get start_rows and end_rows values so that we can estimate range
    // when calling key_range64, the only value we can trust is the value for less
    // The reason is that the key being passed in may be a prefix of keys in the DB
    // As a result, equal may be 0 and greater may actually be equal+greater
    // So, we call key_range64 on the key, and the key that is after it.
    if (!start_key && !end_key) {
        error = estimate_num_rows(kfile, &rows, transaction);
        if (error) {
            ret_val = HA_TOKUDB_RANGE_COUNT;
            goto cleanup;
        }
        ret_val = (rows <= 1) ? 1 : rows;
        goto cleanup;
    }
    if (start_key) {
        uchar inf_byte = (start_key->flag == HA_READ_KEY_EXACT) ? COL_NEG_INF : COL_POS_INF;
        pack_key(&left_key, keynr, key_buff, start_key->key, start_key->length, inf_byte);
        pleft_key = &left_key;
    } else {
        pleft_key = NULL;
    }
    if (end_key) {
        uchar inf_byte = (end_key->flag == HA_READ_BEFORE_KEY) ? COL_NEG_INF : COL_POS_INF;
        pack_key(&right_key, keynr, key_buff2, end_key->key, end_key->length, inf_byte);
        pright_key = &right_key;
    } else {
        pright_key = NULL;
    }
    // keys_range64 can not handle a degenerate range (left_key > right_key), so we filter here
    if (pleft_key && pright_key && tokudb_cmp_dbt_key(kfile, pleft_key, pright_key) > 0) {
        rows = 0;
    } else {
        uint64_t less, equal1, middle, equal2, greater;
        bool is_exact;
        error = kfile->keys_range64(kfile, transaction, pleft_key, pright_key,
                                    &less, &equal1, &middle, &equal2, &greater, &is_exact);
        if (error) {
            ret_val = HA_TOKUDB_RANGE_COUNT;
            goto cleanup;
        }
        rows = middle;
    }

    // MySQL thinks a return value of 0 means there are exactly 0 rows
    // Therefore, always return non-zero so this assumption is not made
    ret_val = (ha_rows) (rows <= 1 ? 1 : rows);

cleanup:
    if (tokudb_debug & TOKUDB_DEBUG_RETURN) {
        TOKUDB_HANDLER_TRACE("return %" PRIu64 " %" PRIu64, (uint64_t) ret_val, rows);
    }
    DBUG_RETURN(ret_val);
}

用户创建的表可能只有数据没有索引,也可能有好几个索引。optimizer选择索引的过程:用search condition找出可用索引的集合,然后尝试用每个可选索引计算代价,也就是计算read_time。这个值是根据records_in_range返回的记录条数计算出来的。
Optimizer会选择代价最小的索引(在server层被称为access path)去引擎里面取数据,访问access path的方式可能是index point query/index range query也可能是full index scan,也可能是full table scan。

Read data

选定了索引,server层会把索引信息(keynr)传给引擎,在引擎层创建索引的cursor去读取数据。一般来说,对于full table scan引擎层会隐式转成pk index scan。

Full table scan

我们先来看一下full table scan的函数:

  • rnd_init: 调用index_init隐式转为pk index scan,并锁表
  • rnd_next:调用get_next读取下一行数据,这个函数后面会详细讨论
  • rnd_end:结束scan
int ha_tokudb::rnd_init(bool scan) {
    int error = 0;
    range_lock_grabbed = false;
    error = index_init(MAX_KEY, 0);
    if (error) { goto cleanup;}

    if (scan) {
        error = prelock_range(NULL, NULL);
        if (error) { goto cleanup; }
        range_lock_grabbed = true;
    }

    error = 0;
cleanup:
    if (error) {
        index_end();
        last_cursor_error = error;
    }
    TOKUDB_HANDLER_DBUG_RETURN(error);
}

int ha_tokudb::rnd_next(uchar * buf) {
    ha_statistic_increment(&SSV::ha_read_rnd_next_count);
    int error = get_next(buf, 1, NULL, false);
    TOKUDB_HANDLER_DBUG_RETURN(error);
}

int ha_tokudb::rnd_end() {
    range_lock_grabbed = false;
    TOKUDB_HANDLER_DBUG_RETURN(index_end());
}

Index scan

ICP

当search condition非空时,server层可能会选择使用ICP (index condition pushdown),把search condition下推到引擎层来做过滤。

  • keyno_arg:server层选的索引index:keyno_arg
  • idx_cond_arg:server层的search condition,可能包含过滤条件
Item* ha_tokudb::idx_cond_push(uint keyno_arg, Item* idx_cond_arg) {
    toku_pushed_idx_cond_keyno = keyno_arg;
    toku_pushed_idx_cond = idx_cond_arg;
    return idx_cond_arg;
}

Index init

前面提到full table scan会隐式转为pk index scan,在rnd_init中调用index_init把tokudb_active_index设置为primary_key。
Handler类成员active_index表示当前索引index,这个值等于MAX_KEY(64)表示full table scan。
Tokudb类成员tokudb_active_index表示tokudb当前的索引index,一般来说这个值跟active_index是一样的。
Full table scan是个例外,active_index等于MAX_KEY,tokudb_active_index等于primary_key。
Index_init中最重要的工作就是创建cursor,并且重置bulk fetch信息。bulk fetch将在get_next函数中详细讨论。

int ha_tokudb::index_init(uint keynr, bool sorted) {
    int error;
    THD* thd = ha_thd();

    /*
       Under some very rare conditions (like full joins) we may already have
       an active cursor at this point
     */
    if (cursor) {
        int r = cursor->c_close(cursor);
        assert(r==0);
        remove_from_trx_handler_list();
    }
    active_index = keynr;

    if (active_index < MAX_KEY) {
        DBUG_ASSERT(keynr <= table->s->keys);
    } else {
        DBUG_ASSERT(active_index == MAX_KEY);
        keynr = primary_key;
    }
    tokudb_active_index = keynr;

#if TOKU_CLUSTERING_IS_COVERING
    if (keynr < table->s->keys && table->key_info[keynr].option_struct->clustering)
        key_read = false;
#endif

    last_cursor_error = 0;
    range_lock_grabbed = false;
    range_lock_grabbed_null = false;
    DBUG_ASSERT(share->key_file[keynr]);
    cursor_flags = get_cursor_isolation_flags(lock.type, thd);
    if (use_write_locks) {
        cursor_flags |= DB_RMW;
    }
    if (get_disable_prefetching(thd)) {
        cursor_flags |= DBC_DISABLE_PREFETCHING;
    }
    if ((error = share->key_file[keynr]->cursor(share->key_file[keynr], transaction, &cursor, cursor_flags))) {
        last_cursor_error = error;
        cursor = NULL;             // Safety
        goto exit;
    }
    cursor->c_set_check_interrupt_callback(cursor, tokudb_killed_thd_callback, thd);
    memset((void *) &last_key, 0, sizeof(last_key));

    add_to_trx_handler_list();

    if (thd_sql_command(thd) == SQLCOM_SELECT) {
        set_query_columns(keynr);
        unpack_entire_row = false;
    }
    else {
        unpack_entire_row = true;
    }
    invalidate_bulk_fetch();
    doing_bulk_fetch = false;
    maybe_index_scan = false;
    error = 0;
exit:
    TOKUDB_HANDLER_DBUG_RETURN(error);
}

Prepare index

初始化cursor之后,server层会调下面四个函数之一去拿<start_key,end_key>区间的range锁。

  • prepare_index_scan
  • prepare_index_key_scan
  • prepare_range_scan
  • read_range_first

这四个函数都是调用prelock_range去拿rangelock。

  • prepare_index_scan拿的是<负无穷,正无穷>区间的rangelock,其实就是锁表。
  • prepare_index_key_scan只拿对应key的rangelock,
  • prepare_range_scan和read_range_first都是拿<start_key,end_key>区间的rangelock。前者是处理reverse index range scan的,后者是处理index range scan的。

Start_key和end_key就是server层传下来的range区间的起点和终点,是server层的数据结构,prelock_range会生成相应的索引key并获取索引key的rangelock。

Full table scan的时候,rnd_init直接调用prelock_range拿<负无穷,正无穷>区间的rangelock,也就是锁表。
由于full table scan转pk index scan是在引擎内部做隐式转换,sever层并不知道,不走prepare_index_scan。

Rangelock的机制在之前的月报有提到。
如果既不是SERIALIZABLE隔离级别,也不是为写操作读取数据,调用prelock_range是不会真的去拿rangelock锁的。此种情况的rangelock锁是在query成功返回前拿的,防止并发事务更新相应的数据。

static int
c_set_bounds(DBC *dbc, const DBT *left_key, const DBT *right_key, bool pre_acquire, int out_of_range_error) {
    if (out_of_range_error != DB_NOTFOUND &&
        out_of_range_error != TOKUDB_OUT_OF_RANGE &&
        out_of_range_error != 0) {
        return toku_ydb_do_error(
            dbc->dbp->dbenv,
            EINVAL,
            "Invalid out_of_range_error [%d] for %s\n",
            out_of_range_error,
            __FUNCTION__
            );
    }
    if (left_key == toku_dbt_negative_infinity() && right_key == toku_dbt_positive_infinity()) {
        out_of_range_error = 0;
    }
    DB *db = dbc->dbp;
    DB_TXN *txn = dbc_struct_i(dbc)->txn;
    HANDLE_PANICKED_DB(db);
    toku_ft_cursor_set_range_lock(dbc_ftcursor(dbc), left_key, right_key,
                                   (left_key == toku_dbt_negative_infinity()),
                                   (right_key == toku_dbt_positive_infinity()),
                                   out_of_range_error);
    if (!db->i->lt || !txn || !pre_acquire)
        return 0;
    //READ_UNCOMMITTED and READ_COMMITTED transactions do not need read locks.
    if (!dbc_struct_i(dbc)->rmw && dbc_struct_i(dbc)->iso != TOKU_ISO_SERIALIZABLE)
        return 0;

    toku::lock_request::type lock_type = dbc_struct_i(dbc)->rmw ?
        toku::lock_request::type::WRITE : toku::lock_request::type::READ;
    int r = toku_db_get_range_lock(db, txn, left_key, right_key, lock_type);
    return r;
}

Read index

如果server层指定了range的start_key和end_key,handler的执行框架会根据execution plan指定的方式访问索引数据。

第一行数据的访问方式:

  • Index point query:server层直接调用index_read
  • Index range scan且start_key非空:server层通常是调用read_range_first函数读取第一行数据。read_range_first最终也是调用index_read
  • Index range scan且start_key为空:server层直接调用index_first
  • Index reverse range scan且end_key非空:server层通常是调用index_read读数据
  • Index reverse range scan且end_key为空:server层直接调用index_last
  • Full index scan:server层直接调用index_first
  • Reverse full index scan:server层直接调用index_last

Index_read函数比较长,举几个常见的场景来说明
1) index point query:

  • HA_READ_KEY_EXACT

2) index range query:

  • HA_READ_AFTER_KEY:处理大于start_key的情况
  • HA_READ_KEY_OR_NEXT:处理大于等于start_key的情况

3) reverse index range query:

  • HA_READ_BEFORE_KEY:处理小于end_key的情况
  • HA_READ_PREFIX_LAST_OR_PREV:处理小于等于end_key的情况
int ha_tokudb::index_read(
    uchar* buf,
    const uchar* key,
    uint key_len,
    enum ha_rkey_function find_flag) {

    invalidate_bulk_fetch();

    DBT row;
    DBT lookup_key;
    int error = 0;
    uint32_t flags = 0;
    THD* thd = ha_thd();
    tokudb_trx_data* trx = (tokudb_trx_data*)thd_get_ha_data(thd, tokudb_hton);
    struct smart_dbt_info info;
    struct index_read_info ir_info;

    HANDLE_INVALID_CURSOR();

    // if we locked a non-null key range and we now have a null key, then
    // remove the bounds from the cursor
    if (range_lock_grabbed &&
        !range_lock_grabbed_null &&
        index_key_is_null(table, tokudb_active_index, key, key_len)) {
        range_lock_grabbed = range_lock_grabbed_null = false;
        cursor->c_remove_restriction(cursor);
    }

    ha_statistic_increment(&SSV::ha_read_key_count);
    memset((void *) &row, 0, sizeof(row));

    info.ha = this;
    info.buf = buf;
    info.keynr = tokudb_active_index;

    ir_info.smart_dbt_info = info;
    ir_info.cmp = 0;

    flags = SET_PRELOCK_FLAG(0);
    switch (find_flag) {
    case HA_READ_KEY_EXACT: /* Find first record else error */ {
        pack_key(&lookup_key, tokudb_active_index, key_buff3, key, key_len, COL_NEG_INF);
        DBT lookup_bound;
        pack_key(&lookup_bound, tokudb_active_index, key_buff4, key, key_len, COL_POS_INF);
        ir_info.orig_key = &lookup_key;
        error = cursor->c_getf_set_range_with_bound(cursor, flags, &lookup_key, &lookup_bound, SMART_DBT_IR_CALLBACK(key_read), &ir_info);
        if (ir_info.cmp) {
            error = DB_NOTFOUND;
        }
        break;
    }
    case HA_READ_AFTER_KEY: /* Find next rec. after key-record */
        pack_key(&lookup_key, tokudb_active_index, key_buff3, key, key_len, COL_POS_INF);
        error = cursor->c_getf_set_range(cursor, flags, &lookup_key, SMART_DBT_CALLBACK(key_read), &info);
        break;
    case HA_READ_BEFORE_KEY: /* Find next rec. before key-record */
        pack_key(&lookup_key, tokudb_active_index, key_buff3, key, key_len, COL_NEG_INF);
        error = cursor->c_getf_set_range_reverse(cursor, flags, &lookup_key, SMART_DBT_CALLBACK(key_read), &info);
        break;
    case HA_READ_KEY_OR_NEXT: /* Record or next record */
        pack_key(&lookup_key, tokudb_active_index, key_buff3, key, key_len, COL_NEG_INF);
        error = cursor->c_getf_set_range(cursor, flags, &lookup_key, SMART_DBT_CALLBACK(key_read), &info);
        break;
    //
    // This case does not seem to ever be used, it is ok for it to be slow
    //
    case HA_READ_KEY_OR_PREV: /* Record or previous */
        pack_key(&lookup_key, tokudb_active_index, key_buff3, key, key_len, COL_NEG_INF);
        ir_info.orig_key = &lookup_key;
        error = cursor->c_getf_set_range(cursor, flags, &lookup_key, SMART_DBT_IR_CALLBACK(key_read), &ir_info);
        if (error == DB_NOTFOUND) {
            error = cursor->c_getf_last(cursor, flags, SMART_DBT_CALLBACK(key_read), &info);
        }
        else if (ir_info.cmp) {
            error = cursor->c_getf_prev(cursor, flags, SMART_DBT_CALLBACK(key_read), &info);
        }
        break;
    case HA_READ_PREFIX_LAST_OR_PREV: /* Last or prev key with the same prefix */
        pack_key(&lookup_key, tokudb_active_index, key_buff3, key, key_len, COL_POS_INF);
        error = cursor->c_getf_set_range_reverse(cursor, flags, &lookup_key, SMART_DBT_CALLBACK(key_read), &info);
        break;
    case HA_READ_PREFIX_LAST:
        pack_key(&lookup_key, tokudb_active_index, key_buff3, key, key_len, COL_POS_INF);
        ir_info.orig_key = &lookup_key;
        error = cursor->c_getf_set_range_reverse(cursor, flags, &lookup_key, SMART_DBT_IR_CALLBACK(key_read), &ir_info);
        if (ir_info.cmp) {
            error = DB_NOTFOUND;
        }
        break;
    default:
        TOKUDB_HANDLER_TRACE("unsupported:%d", find_flag);
        error = HA_ERR_UNSUPPORTED;
        break;
    }
    error = handle_cursor_error(error,HA_ERR_KEY_NOT_FOUND,tokudb_active_index);
    if (!error && !key_read && tokudb_active_index != primary_key && !key_is_clustering(&table->key_info[tokudb_active_index])) {
        error = read_full_row(buf);
    }
    trx->stmt_progress.queried++;
    track_progress(thd);

cleanup:
    TOKUDB_HANDLER_DBUG_RETURN(error);
}

Index_read在调用ydb_cursor.cc中的回调函数时,flags参数初始化为0。ydb_cursor.cc中注册的回调函数会检查tokudb_cursor->rmw标记,如果tokudb_cursor->rmw是0,并且不是SERIALIZABLE隔离级别,函数
query_context_with_input_init会设置context的do_locking字段,告诉toku_ft_cursor_set_range在成功返回前去拿rangelock。

static int
c_getf_set_range_with_bound(DBC *c, uint32_t flag, DBT *key, DBT *key_bound, YDB_CALLBACK_FUNCTION f, void *extra) {
    HANDLE_PANICKED_DB(c->dbp);
    HANDLE_CURSOR_ILLEGAL_WORKING_PARENT_TXN(c);

    int r = 0;
    QUERY_CONTEXT_WITH_INPUT_S context; //Describes the context of this query.
    query_context_with_input_init(&context, c, flag, key, NULL, f, extra);
    while (r == 0) {
        //toku_ft_cursor_set_range will call c_getf_set_range_callback(..., context) (if query is successful)
        r = toku_ft_cursor_set_range(dbc_ftcursor(c), key, key_bound, c_getf_set_range_callback, &context);
        if (r == DB_LOCK_NOTGRANTED) {
            r = toku_db_wait_range_lock(context.base.db, context.base.txn, &context.base.request);
        } else {
            break;
        }
    }
    query_context_base_destroy(&context.base);
    return r;
}

static int
c_getf_set_range_callback(uint32_t keylen, const void *key, uint32_t vallen, const void *val, void *extra, bool lock_only) {
    QUERY_CONTEXT_WITH_INPUT super_context = (QUERY_CONTEXT_WITH_INPUT) extra;
    QUERY_CONTEXT_BASE       context       = &super_context->base;

    int r;
    DBT found_key = { .data = (void *) key, .size = keylen };

    //Lock:
    //  left(key,val)  = (input_key, -infinity)
    //  right(key) = found ? found_key : infinity
    //  right(val) = found ? found_val : infinity
    if (context->do_locking) {
        const DBT *left_key = super_context->input_key;
        const DBT *right_key = key != NULL ? &found_key : toku_dbt_positive_infinity();
        r = toku_db_start_range_lock(context->db, context->txn, left_key, right_key, query_context_determine_lock_type(context), &context->request);
    } else {
        r = 0;
    }

    //Call application-layer callback if found and locks were successfully obtained.
    if (r==0 && key!=NULL && !lock_only) {
        DBT found_val = { .data = (void *) val, .size = vallen };
        context->r_user_callback = context->f(&found_key, &found_val, context->f_extra);
        r = context->r_user_callback;
    }

    //Give ft-layer an error (if any) to return from toku_ft_cursor_set_range
    return r;
}

Get next

取到第一行数据后,server层会根据execution plan来调用 index_next(index_next_same)或者index_prev来取后面的记录。

  • index_next_same:读取相同index的下一个记录。
  • index_next:读取range区间内的下一个记录,如果设置ICP,还会对找到的记录进行过滤条件匹配。
  • index_prev:读取range区间内的上一个记录,如果设置ICP,还会对找到的记录进行过滤条件匹配。

还有两个读取数据的方法:

  • index_first:读取index的第一条记录
  • index_last:读取index最后一条记录

这几个函数比较简单,这里只分析index_next函数,感兴趣的朋友可以自行分析其余的函数。
index_next直接调用get_next函数读取下一条记录。

int ha_tokudb::index_next(uchar * buf) {
    TOKUDB_HANDLER_DBUG_ENTER("");
    ha_statistic_increment(&SSV::ha_read_next_count);
    int error = get_next(buf, 1, NULL, key_read);
    TOKUDB_HANDLER_DBUG_RETURN(error);
}

Bulk fetch

Tokudb为range query做了一个优化,被称作bulk fetch。对当前basement节点上落在range区间的key进行批量读取,一次msg apply多次读key操作,同时也减轻leaf节点读写锁争抢,避免频繁拿锁放锁。
Tokudb为提供bulk fetch功能,增加了如下几个数据成员:

  • doing_bulk_fetch:标记是否正在进行bulk fetch
  • range_query_buff:缓存批量读取数据的buffer
  • size_range_query_buff:range_query_buff的malloc_size
  • bytes_used_in_range_query_buff:range_query_buff的实际size
  • curr_range_query_buff_offset:range_query_buff的当前位置
  • bulk_fetch_iteration和rows_fetched_using_bulk_fetch是统计数据,控制批量大小
class ha_tokudb : public handler {
private:
    ...
    uchar* range_query_buff; // range query buffer
    uint32_t size_range_query_buff; // size of the allocated range query buffer
    uint32_t bytes_used_in_range_query_buff; // number of bytes used in the range query buffer
    uint32_t curr_range_query_buff_offset; // current offset into the range query buffer for queries to read
    uint64_t bulk_fetch_iteration;
    uint64_t rows_fetched_using_bulk_fetch;
    bool doing_bulk_fetch;
    ...
};

Get_next函数首先判读是否可以从当前的bulk fetch bufffer中读取数据,判读的标准是bytes_used_in_range_query_buff - curr_range_query_buff_offset > 0,表示bulk fetch buffer有数据可以读取。

  1. 如果条件成立,调用read_data_from_range_query_buff直接从bulk fetch buffer中读数据。
  2. 如果bulk fetch buffer没有数据可读了,需要检查icp_went_out_of_range判断是否已超出range范围,那样的话表示没有更多数据,可以直接返回。
  3. 如果前面两个条件都不满足,需要调用cursor读取后面的数据。如果是bulk fetch的情况,需要调用invalidate_bulk_fetch重置bulf fetch的数据结构。

如果用户禁掉bulk fetch的功能,该如何处理呢?禁掉bulk fetch,第1和第2两个条件都不满足,直接执行invalidate_bulk_fetch,然后检查doing_bulk_fetch标记为false,调用cursor读取数据。这部分比较简单,请读者自行分析。

bulk fetch的处理跟非bulk fetch的处理类似,最大的区别在于cursor->c_getf_XXX方法的回调函数和回调函数参数。它们分别被设置为smart_dbt_bf_callback和struct smart_dbt_bf_info结构的指针。

smart_dbt_bf_info结构告诉回调函数如何缓存当前数据,并且如何读取下一行数据。

  • ha:tokudb handler指针
  • need_val:bulk fetch buffer是否要缓存value,对于pk和cluster index情况设置成true,其他情况为false
  • director:读取数据的方向。1表示next,-1表示prev
  • thd:server层的线程指针
  • buf:server层提供的buffer
  • key_to_compare:比较key,只有index_next_same需要设置这个参数
typedef struct smart_dbt_bf_info {
    ha_tokudb* ha;
    bool need_val;
    int direction;
    THD* thd;
    uchar* buf;
    DBT* key_to_compare;
} *SMART_DBT_BF_INFO

一个批量读取完成后,get_next会调用read_data_from_range_query_buff,从bulk fetch buffer中取数据。

Get_next成功读取一行数据后,需要判断是否是需要回表读取row。对于pk和cluster index的情况,index中存储了完整数据不需要回表。

int ha_tokudb::get_next(
    uchar* buf,
    int direction,
    DBT* key_to_compare,
    bool do_key_read) {

    int error = 0;
    HANDLE_INVALID_CURSOR();

    if (maybe_index_scan) {
        maybe_index_scan = false;
        if (!range_lock_grabbed) {
            error = prepare_index_scan();
        }
    }

    if (!error) {
        uint32_t flags = SET_PRELOCK_FLAG(0);

        // we need to read the val of what we retrieve if
        // we do NOT have a covering index AND we are using a clustering secondary
        // key
        bool need_val =
            (do_key_read == 0) &&
            (tokudb_active_index == primary_key ||
             key_is_clustering(&table->key_info[tokudb_active_index]));

        if ((bytes_used_in_range_query_buff -
             curr_range_query_buff_offset) > 0) {
            error = read_data_from_range_query_buff(buf, need_val, do_key_read);
        } else if (icp_went_out_of_range) {
            icp_went_out_of_range = false;
            error = HA_ERR_END_OF_FILE;
        } else {
            invalidate_bulk_fetch();
            if (doing_bulk_fetch) {
                struct smart_dbt_bf_info bf_info;
                bf_info.ha = this;
                // you need the val if you have a clustering index and key_read is not 0;
                bf_info.direction = direction;
                bf_info.thd = ha_thd();
                bf_info.need_val = need_val;
                bf_info.buf = buf;
                bf_info.key_to_compare = key_to_compare;
                //
                // call c_getf_next with purpose of filling in range_query_buff
                //
                rows_fetched_using_bulk_fetch = 0;
                // it is expected that we can do ICP in the smart_dbt_bf_callback
                // as a result, it's possible we don't return any data because
                // none of the rows matched the index condition. Therefore, we need
                // this while loop. icp_out_of_range will be set if we hit a row that
                // the index condition states is out of our range. When that hits,
                // we know all the data in the buffer is the last data we will retrieve
                while (bytes_used_in_range_query_buff == 0 &&
                       !icp_went_out_of_range && error == 0) {
                    if (direction > 0) {
                        error =
                            cursor->c_getf_next(
                                cursor,
                                flags,
                                smart_dbt_bf_callback,
                                &bf_info);
                    } else {
                        error =
                            cursor->c_getf_prev(
                                cursor,
                                flags,
                                smart_dbt_bf_callback,
                                &bf_info);
                    }
                }
                // if there is no data set and we went out of range,
                // then there is nothing to return
                if (bytes_used_in_range_query_buff == 0 &&
                    icp_went_out_of_range) {
                    icp_went_out_of_range = false;
                    error = HA_ERR_END_OF_FILE;
                }
                if (bulk_fetch_iteration < HA_TOKU_BULK_FETCH_ITERATION_MAX) {
                    bulk_fetch_iteration++;
                }

                error =
                    handle_cursor_error(
                        error,
                        HA_ERR_END_OF_FILE,
                        tokudb_active_index);
                if (error) {
                    goto cleanup;
                }

                //
                // now that range_query_buff is filled, read an element
                //
                error =
                    read_data_from_range_query_buff(buf, need_val, do_key_read);
            } else {
                struct smart_dbt_info info;
                info.ha = this;
                info.buf = buf;
                info.keynr = tokudb_active_index;

                if (direction > 0) {
                    error =
                        cursor->c_getf_next(
                            cursor,
                            flags,
                            SMART_DBT_CALLBACK(do_key_read),
                            &info);
                } else {
                    error =
                        cursor->c_getf_prev(
                            cursor,
                            flags,
                            SMART_DBT_CALLBACK(do_key_read),
                            &info);
                }
                error =
                    handle_cursor_error(
                        error,
                        HA_ERR_END_OF_FILE,
                        tokudb_active_index);
            }
        }
    }

    //
    // at this point, one of two things has happened
    // either we have unpacked the data into buf, and we
    // are done, or we have unpacked the primary key
    // into last_key, and we use the code below to
    // read the full row by doing a point query into the
    // main table.
    //
    if (!error &&
        !do_key_read &&
        (tokudb_active_index != primary_key) &&
        !key_is_clustering(&table->key_info[tokudb_active_index])) {
        error = read_full_row(buf);
    }

    if (!error) {
        THD *thd = ha_thd();
        tokudb_trx_data* trx =
            static_cast<tokudb_trx_data*>(thd_get_ha_data(thd, tokudb_hton));
        trx->stmt_progress.queried++;
        track_progress(thd);
        if (thd_killed(thd))
            error = ER_ABORTING_CONNECTION;
    }
cleanup:
    return error;
}

下面我们一起看看回调函数smart_dbt_bf_callback的处理。这个函数是fill_range_query_buf简单封装,当成功读取一行索引数据后,把结果缓存到bulk fetch buffer中,并继续读取下一行数据。

static int smart_dbt_bf_callback(
    DBT const* key,
    DBT const* row,
    void* context) {
    SMART_DBT_BF_INFO info = (SMART_DBT_BF_INFO)context;
    return
        info->ha->fill_range_query_buf(
            info->need_val,
            key,
            row,
            info->direction,
            info->thd,
            info->buf,
            info->key_to_compare);
}

接下来,让我们把目光聚焦在fill_range_query_buf函数。参数key和value是当前读取到索引key和value;其余的参数是从smart_dbt_bf_info中结构提取出来的server层调用时指定的信息。

如果指定了key_to_compare,需要判断当前读取的key是否等于key_to_compare,因为二级索引的key后面拼了pk,所以这里做的是前缀比较。如果前缀不匹配,表示已经读到一个新key,设置icp_went_out_of_range并退出。

如果server层设置了ICP信息,需要判断当前读取的索引key是否在range范围内。
一般来说,判断是否在range范围内的方法是跟prelocked_right_range(range scan)或者prelocked_left_range(reverse range scan)比较的。
而ICP的情况下,判断是否在range范围内是跟end_range做比较的。
对于索引key不在range范围内的情况,设置icp_went_out_of_range并返回。

如果当前读到的索引key是在range范围内,ICP的情况还要做过滤条件检查。如果满足过滤条件,就存储到bulk fetch buffer中;不满足过滤条件,就跳过这条记录取下一条。

把key存储到bulk fetch buffer中时,需要检查need_val。为true时,先存key后存value;否则,只存key。
Value要存的数据可能是整个row,可能是set_query_columns函数记录的那些字段的数据。如果是第二种情况,需要把相应字段的数据提取出来。
Bulk fetch buffer中的数据按照一定格式存储,先存4个字节的size,接着存data。
当前key的存储位置是在bytes_used_in_range_query_buff偏移位置。
把key/value数据缓存到bulk fetch buffer中以后,还需要更新bytes_used_in_range_query_buff指向下一次写入的位置。

对于非ICP的情况,在fill_range_query_buf函数的最后判断是否超出range范围。这里跟prelocked_right_range(range scan)或者prelocked_left_range(reverse range scan)做比较。这两个值是在prelock_range函数设置的,也是rangelock的范围。

如果当前读取的key属于range范围内,需要继续读取下一条数据到bulk fetch buffer中,fill_range_query_buf返回TOKUDB_CURSOR_CONTINUE告诉toku_ft_search继续读取当前basement节点的下一条数据。
bulk fetch不能跨越basement节点,因为无法保证其他basement节点上是否做过msg apply。

int ha_tokudb::fill_range_query_buf(
    bool need_val,
    DBT const* key,
    DBT const* row,
    int direction,
    THD* thd,
    uchar* buf,
    DBT* key_to_compare) {

    int error;
    //
    // first put the value into range_query_buf
    //
    uint32_t size_remaining =
        size_range_query_buff - bytes_used_in_range_query_buff;
    uint32_t size_needed;
    uint32_t user_defined_size = tokudb::sysvars::read_buf_size(thd);
    uchar* curr_pos = NULL;

    if (key_to_compare) {
        int cmp = tokudb_prefix_cmp_dbt_key(
            share->key_file[tokudb_active_index],
            key_to_compare,
            key);
        if (cmp) {
            icp_went_out_of_range = true;
            error = 0;
            goto cleanup;
        }
    }

    // if we have an index condition pushed down, we check it
    if (toku_pushed_idx_cond &&
        (tokudb_active_index == toku_pushed_idx_cond_keyno)) {
        unpack_key(buf, key, tokudb_active_index);
        enum icp_result result =
            toku_handler_index_cond_check(toku_pushed_idx_cond);

        // If we have reason to stop, we set icp_went_out_of_range and get out
        // otherwise, if we simply see that the current key is no match,
        // we tell the cursor to continue and don't store
        // the key locally
        if (result == ICP_OUT_OF_RANGE || thd_killed(thd)) {
            icp_went_out_of_range = true;
            error = 0;
            DEBUG_SYNC(ha_thd(), "tokudb_icp_asc_scan_out_of_range");
            goto cleanup;
        } else if (result == ICP_NO_MATCH) {
            // if we are performing a DESC ICP scan and have no end_range
            // to compare to stop using ICP filtering as there isn't much more
            // that we can do without going through contortions with remembering
            // and comparing key parts.
            if (!end_range &&
                direction < 0) {

                cancel_pushed_idx_cond();
                DEBUG_SYNC(ha_thd(), "tokudb_icp_desc_scan_invalidate");
            }

            error = TOKUDB_CURSOR_CONTINUE;
            goto cleanup;
        }
    }

    // at this point, if ICP is on, we have verified that the key is one
    // we are interested in, so we proceed with placing the data
    // into the range query buffer

    if (need_val) {
        if (unpack_entire_row) {
            size_needed = 2*sizeof(uint32_t) + key->size + row->size;
        } else {
            // this is an upper bound
            size_needed =
                // size of key length
                sizeof(uint32_t) +
                // key and row
                key->size + row->size +
                // lengths of varchars stored
                num_var_cols_for_query * (sizeof(uint32_t)) +
                // length of blobs
                sizeof(uint32_t);
        }
    } else {
        size_needed = sizeof(uint32_t) + key->size;
    }
    if (size_remaining < size_needed) {
        range_query_buff =
            static_cast<uchar*>(tokudb::memory::realloc(
                static_cast<void*>(range_query_buff),
                bytes_used_in_range_query_buff + size_needed,
                MYF(MY_WME)));
        if (range_query_buff == NULL) {
            error = ENOMEM;
            invalidate_bulk_fetch();
            goto cleanup;
        }
        size_range_query_buff = bytes_used_in_range_query_buff + size_needed;
    }
    //
    // now we know we have the size, let's fill the buffer, starting with the key
    //
    curr_pos = range_query_buff + bytes_used_in_range_query_buff;

    *reinterpret_cast<uint32_t*>(curr_pos) = key->size;
    curr_pos += sizeof(uint32_t);
    memcpy(curr_pos, key->data, key->size);
    curr_pos += key->size;
    if (need_val) {
        if (unpack_entire_row) {
            *reinterpret_cast<uint32_t*>(curr_pos) = row->size;
            curr_pos += sizeof(uint32_t);
            memcpy(curr_pos, row->data, row->size);
            curr_pos += row->size;
        } else {
            // need to unpack just the data we care about
            const uchar* fixed_field_ptr = static_cast<const uchar*>(row->data);
            fixed_field_ptr += table_share->null_bytes;

            const uchar* var_field_offset_ptr = NULL;
            const uchar* var_field_data_ptr = NULL;

            var_field_offset_ptr =
                fixed_field_ptr +
                share->kc_info.mcp_info[tokudb_active_index].fixed_field_size;
            var_field_data_ptr =
                var_field_offset_ptr +
                share->kc_info.mcp_info[tokudb_active_index].len_of_offsets;

            // first the null bytes
            memcpy(curr_pos, row->data, table_share->null_bytes);
            curr_pos += table_share->null_bytes;
            // now the fixed fields
            //
            // first the fixed fields
            //
            for (uint32_t i = 0; i < num_fixed_cols_for_query; i++) {
                uint field_index = fixed_cols_for_query[i];
                memcpy(
                    curr_pos,
                    fixed_field_ptr + share->kc_info.cp_info[tokudb_active_index][field_index].col_pack_val,
                    share->kc_info.field_lengths[field_index]);
                curr_pos += share->kc_info.field_lengths[field_index];
            }

            //
            // now the var fields
            //
            for (uint32_t i = 0; i < num_var_cols_for_query; i++) {
                uint field_index = var_cols_for_query[i];
                uint32_t var_field_index =
                    share->kc_info.cp_info[tokudb_active_index][field_index].col_pack_val;
                uint32_t data_start_offset;
                uint32_t field_len;

                get_var_field_info(
                    &field_len,
                    &data_start_offset,
                    var_field_index,
                    var_field_offset_ptr,
                    share->kc_info.num_offset_bytes);
                memcpy(curr_pos, &field_len, sizeof(field_len));
                curr_pos += sizeof(field_len);
                memcpy(
                    curr_pos,
                    var_field_data_ptr + data_start_offset,
                    field_len);
                curr_pos += field_len;
            }

            if (read_blobs) {
                uint32_t blob_offset = 0;
                uint32_t data_size = 0;
                //
                // now the blobs
                //
                get_blob_field_info(
                    &blob_offset,
                    share->kc_info.mcp_info[tokudb_active_index].len_of_offsets,
                    var_field_data_ptr,
                    share->kc_info.num_offset_bytes);
                data_size =
                    row->size -
                    blob_offset -
                    static_cast<uint32_t>((var_field_data_ptr -
                        static_cast<const uchar*>(row->data)));
                memcpy(curr_pos, &data_size, sizeof(data_size));
                curr_pos += sizeof(data_size);
                memcpy(curr_pos, var_field_data_ptr + blob_offset, data_size);
                curr_pos += data_size;
            }
        }
    }

    bytes_used_in_range_query_buff = curr_pos - range_query_buff;
    assert_always(bytes_used_in_range_query_buff <= size_range_query_buff);

    //
    // now determine if we should continue with the bulk fetch
    // we want to stop under these conditions:
    //  - we overran the prelocked range
    //  - we are close to the end of the buffer
    //  - we have fetched an exponential amount of rows with
    //  respect to the bulk fetch iteration, which is initialized
    //  to 0 in index_init() and prelock_range().

    rows_fetched_using_bulk_fetch++;
    // if the iteration is less than the number of possible shifts on
    // a 64 bit integer, check that we haven't exceeded this iterations
    // row fetch upper bound.
    if (bulk_fetch_iteration < HA_TOKU_BULK_FETCH_ITERATION_MAX) {
        uint64_t row_fetch_upper_bound = 1LLU << bulk_fetch_iteration;
        assert_always(row_fetch_upper_bound > 0);
        if (rows_fetched_using_bulk_fetch >= row_fetch_upper_bound) {
            error = 0;
            goto cleanup;
        }
    }

    if (bytes_used_in_range_query_buff +
        table_share->rec_buff_length >
        user_defined_size) {
        error = 0;
        goto cleanup;
    }
    if (direction > 0) {
        // compare what we got to the right endpoint of prelocked range
        // because we are searching keys in ascending order
        if (prelocked_right_range_size == 0) {
            error = TOKUDB_CURSOR_CONTINUE;
            goto cleanup;
        }
        DBT right_range;
        memset(&right_range, 0, sizeof(right_range));
        right_range.size = prelocked_right_range_size;
        right_range.data = prelocked_right_range;
        int cmp = tokudb_cmp_dbt_key(
            share->key_file[tokudb_active_index],
            key,
            &right_range);
        error = (cmp > 0) ? 0 : TOKUDB_CURSOR_CONTINUE;
    } else {
        // compare what we got to the left endpoint of prelocked range
        // because we are searching keys in descending order
        if (prelocked_left_range_size == 0) {
            error = TOKUDB_CURSOR_CONTINUE;
            goto cleanup;
        }
        DBT left_range;
        memset(&left_range, 0, sizeof(left_range));
        left_range.size = prelocked_left_range_size;
        left_range.data = prelocked_left_range;
        int cmp = tokudb_cmp_dbt_key(
            share->key_file[tokudb_active_index],
            key,
            &left_range);
        error = (cmp < 0) ? 0 : TOKUDB_CURSOR_CONTINUE;
    }
cleanup:
    return error;
}

Bulk fetch buffer数据准备好了,我们就可以从read_data_from_range_query_buff读取数据了。
Curr_range_query_buff_offset表示当前读取的位置。
首先读key信息。如果need_value为true,还要读取data信息。可能读整行数据,也可能只需要读取函数set_query_columns设置的那些字段。
读取完成之后,调整curr_range_query_buff_offset指向下一次读取的位置。

int ha_tokudb::read_data_from_range_query_buff(uchar* buf, bool need_val, bool do_key_read) {
    // buffer has the next row, get it from there
    int error;
    uchar* curr_pos = range_query_buff+curr_range_query_buff_offset;
    DBT curr_key;
    memset((void *) &curr_key, 0, sizeof(curr_key));

    // get key info
    uint32_t key_size = *(uint32_t *)curr_pos;
    curr_pos += sizeof(key_size);
    uchar* curr_key_buff = curr_pos;
    curr_pos += key_size;

    curr_key.data = curr_key_buff;
    curr_key.size = key_size;

    // if this is a covering index, this is all we need
    if (do_key_read) {
        assert_always(!need_val);
        extract_hidden_primary_key(tokudb_active_index, &curr_key);
        read_key_only(buf, tokudb_active_index, &curr_key);
        error = 0;
    }
    // we need to get more data
    else {
        DBT curr_val;
        memset((void *) &curr_val, 0, sizeof(curr_val));
        uchar* curr_val_buff = NULL;
        uint32_t val_size = 0;
        // in this case, we don't have a val, we are simply extracting the pk
        if (!need_val) {
            curr_val.data = curr_val_buff;
            curr_val.size = val_size;
            extract_hidden_primary_key(tokudb_active_index, &curr_key);
            error = read_primary_key( buf, tokudb_active_index, &curr_val, &curr_key);
        }
        else {
            extract_hidden_primary_key(tokudb_active_index, &curr_key);
            // need to extract a val and place it into buf
            if (unpack_entire_row) {
                // get val info
                val_size = *(uint32_t *)curr_pos;
                curr_pos += sizeof(val_size);
                curr_val_buff = curr_pos;
                curr_pos += val_size;
                curr_val.data = curr_val_buff;
                curr_val.size = val_size;
                error = unpack_row(buf,&curr_val, &curr_key, tokudb_active_index);
            }
            else {
                if (!(hidden_primary_key && tokudb_active_index == primary_key)) {
                    unpack_key(buf,&curr_key,tokudb_active_index);
                }
                // read rows we care about

                // first the null bytes;
                memcpy(buf, curr_pos, table_share->null_bytes);
                curr_pos += table_share->null_bytes;

                // now the fixed sized rows
                for (uint32_t i = 0; i < num_fixed_cols_for_query; i++) {
                    uint field_index = fixed_cols_for_query[i];
                    Field* field = table->field[field_index];
                    unpack_fixed_field(
                        buf + field_offset(field, table),
                        curr_pos,
                        share->kc_info.field_lengths[field_index]
                        );
                    curr_pos += share->kc_info.field_lengths[field_index];
                }
                // now the variable sized rows
                for (uint32_t i = 0; i < num_var_cols_for_query; i++) {
                    uint field_index = var_cols_for_query[i];
                    Field* field = table->field[field_index];
                    uint32_t field_len = *(uint32_t *)curr_pos;
                    curr_pos += sizeof(field_len);
                    unpack_var_field(
                        buf + field_offset(field, table),
                        curr_pos,
                        field_len,
                        share->kc_info.length_bytes[field_index]
                        );
                    curr_pos += field_len;
                }
                // now the blobs
                if (read_blobs) {
                    uint32_t blob_size = *(uint32_t *)curr_pos;
                    curr_pos += sizeof(blob_size);
                    error = unpack_blobs(
                        buf,
                        curr_pos,
                        blob_size,
                        true
                        );
                    curr_pos += blob_size;
                    if (error) {
                        invalidate_bulk_fetch();
                        goto exit;
                    }
                }
                error = 0;
            }
        }
    }

    curr_range_query_buff_offset = curr_pos - range_query_buff;
exit:
    return error;
}

Index_end

所有数据都读完之后,handler框架会调用index_end关闭cursor,并重置一些状态变量。

int ha_tokudb::index_end() {
    range_lock_grabbed = false;
    range_lock_grabbed_null = false;
    if (cursor) {
        int r = cursor->c_close(cursor);
        assert_always(r==0);
        cursor = NULL;
        remove_from_trx_handler_list();
        last_cursor_error = 0;
    }
    active_index = tokudb_active_index = MAX_KEY;

    //
    // reset query variables
    //
    unpack_entire_row = true;
    read_blobs = true;
    read_key = true;
    num_fixed_cols_for_query = 0;
    num_var_cols_for_query = 0;

    invalidate_bulk_fetch();
    invalidate_icp();
    doing_bulk_fetch = false;
    close_dsmrr();

    TOKUDB_HANDLER_DBUG_RETURN(0);
}

这就是一条query语句在tokudb引擎执行的大致过程。下个月见!

上一篇:iOS之绘制像素到屏幕


下一篇:cocos2d-x (Android)之-那些常见的error记